[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DTMF Relapce Tran not working correctly
Author Message
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #2
RE: DTMF Relapce Tran not working correctly
Description:
Enables or disables the IP phone to send DTMF sequences for transfer function when
pressing the Tran/Transfer soft key or TRAN/TRANSFER key.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), the IP phone will perform the transfer as normal when
pressing the Tran/Transfer soft key or TRAN/TRANSFER key during a call.
If it is set to 1 (Enabled), the IP phone will transmit the designated DTMF digits to the
server for performing call transfer when pressing the Tran/Transfer soft key or
TRAN/TRANSFER key during a call.

From the descrpition above, it's normally, if you enable this function.
The phone only will send the DTMF code.
04-13-2016 06:07 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: DTMF Relapce Tran not working correctly - Karl_Yealink - 04-13-2016 06:07 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T29G DTMF Duration mightychrisgill 1 2,450 02-04-2019 12:50 PM
Last Post: complex1
  Caller-id after attended transfer not working properly on T19P/T41P ddyx 5 6,151 02-06-2018 08:01 AM
Last Post: Lucia_Yealink
  DTMF ISSUE - CASE 40241 - URGENT david_cc 1 4,375 02-24-2017 02:22 PM
Last Post: Michael_Yealink
  Recovery Mode for T41P not working Tonyn 1 5,337 11-21-2016 07:13 AM
Last Post: Yealink_Michael
  SIP-T19P E2 DTMF not working with g.729 seulater 1 3,866 09-29-2016 11:29 AM
Last Post: Travis_Yealink
  T19P E2 always forward not working Lex 1 3,740 05-18-2016 07:15 PM
Last Post: Lex
  Template update not working on T48G Expansion module tas7330 2 5,321 04-28-2016 02:44 PM
Last Post: Horence
  T28 BLF park not working correctly ziggy5376 3 6,708 02-02-2016 10:13 PM
Last Post: Karl_Yealink
  T26P/T28p BLF light not working after firmware upgrade futures 2 10,142 01-27-2016 11:29 PM
Last Post: janduy.manzanos@gmail.com
  Yealink Product working with Juniper Network Issue hafiz 3 6,828 01-25-2016 04:26 AM
Last Post: sharkbitz

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication