[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ok to shorten server expires setting to 3 minutes?
Author Message
asinshesq Offline
Junior Member
**

Posts: 44
Joined: Jul 2014
Reputation: 1
Post: #1
ok to shorten server expires setting to 3 minutes?
I have a home LAN with 5 ip phones (all yealink), and they all use 3cx running on a laptop on the LAN. I noticed recently that when my 3cx server reboots it takes a really long time (10-20 minutes) for 4 of the 5 phones to be listed as registered on 3cx's console even though the phones themselves identify themselves as registered when I go to their webpage interfaces.

The one that registers quickly has a server expires setting of only 180 seconds while the other four phones have server expires settings of 3600 seconds (the default). When I change those settings to 180 seconds they all quickly show up as registered on the 3cx console when I reboot the 3cx laptop (naturally).

So my question: if I leave the server expires setting to 180 seconds for all phones, will that create any problems for my system or LAN as a practical matter? Since I only have 5 phones I am guessing the LAN traffic is not a real world problem...am I correct? What about phone usability? If I am using a phone when it hits the server expires deadline and re-registers, will that make any sound or otherwise interfere with the phone? And does doing this make it more likely that when I pick up a phone to dial I will (if I do it at just the wrong time when the deadline hits) increase the chances that the phone call doesn't go through?

Thanks.
08-23-2015 07:36 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
pmterp Offline
Junior Member
**

Posts: 20
Joined: Jan 2013
Reputation: 1
Post: #2
RE: ok to shorten server expires setting to 3 minutes?
While I'm using a different platform (not 3cx) I have my phones set to register expire every 60 seconds. I use routing rules to redirect calls when there is an internet outage and don't want a long time with phones being down before that rule takes effect. Currently there are 2 phones, both set to 60 seconds and I've not had any problems. It does not cause any issues with ongoing audio streams when it re-registers.

(08-23-2015 07:36 PM)asinshesq Wrote:  So my question: if I leave the server expires setting to 180 seconds for all phones, will that create any problems for my system or LAN as a practical matter? Since I only have 5 phones I am guessing the LAN traffic is not a real world problem...am I correct? What about phone usability? If I am using a phone when it hits the server expires deadline and re-registers, will that make any sound or otherwise interfere with the phone? And does doing this make it more likely that when I pick up a phone to dial I will (if I do it at just the wrong time when the deadline hits) increase the chances that the phone call doesn't go through?
08-24-2015 10:04 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
asinshesq Offline
Junior Member
**

Posts: 44
Joined: Jul 2014
Reputation: 1
Post: #3
RE: ok to shorten server expires setting to 3 minutes?
Thanks for the reply. I've been using 3 minutes for the last few days and I (like you) see no trouble so far.
08-26-2015 07:53 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Yealink VOIP phone losing connection every few minutes robertpowell 0 1,838 03-27-2024 02:29 PM
Last Post: robertpowell
  Phones without a "server/PBX" kermitxyz 0 1,626 11-13-2023 02:26 AM
Last Post: kermitxyz
  MP56 blocked after Multi Factor Authentication (MFA) expires vtamayo 0 2,592 10-01-2022 04:17 AM
Last Post: vtamayo
  What is alarm server alarm.server.address ? (W59R) Ivan86 0 3,464 08-10-2021 04:42 PM
Last Post: Ivan86
  LDAP server is unavailable Andrei9385 2 11,555 07-16-2021 08:34 PM
Last Post: nolto
  T46s won't try to register to server on local subnet jigjag 0 4,703 09-08-2020 10:52 PM
Last Post: jigjag
  .cfg file needed for Zultys provisioning server jerryp 0 5,089 01-30-2020 09:26 PM
Last Post: jerryp
  T27G - Fall Back issues - Successive setting [Solved] BobBluePackets 6 17,197 05-28-2019 04:47 AM
Last Post: BobBluePackets
  How to specify an IP range in the "PushXML allowed server" field? nSolvePaul 2 8,317 11-02-2018 09:59 AM
Last Post: nSolvePaul
  SIP-T27/29 phones (setting) SOFT KEYS (call park) Shawn 3 12,529 11-02-2017 03:49 PM
Last Post: Problemchild

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication