New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T27G - Fall Back issues - Successive setting [Still an issue]
Author Message
BobBluePackets Offline
Junior Member
**

Posts: 9
Joined: Dec 2017
Reputation: 0
Post: #1
T27G - Fall Back issues - Successive setting [Still an issue]
We are working with two FreePBX systems - configuration is identical on the two, at least in terms of FreePBX/Asterisk base settings and Extensions settings - basically a poor mans redundancy

All phones are on the following firmware, 69.84.0.10, but we have also tested a few of the phones on the latest 69.84.0.15 firmware (just in case).

The phones are auto provisioned, and we have setup the phones to work in fallback mode e.g.
1) SIP Server 1 and SIP Server 2 set (ip addresses for the moment - no DNS names used) - keeping it simple
2) No Proxy setup
3) Registration type set to 1 (successive) - not concurrent

Approximately 140 of 151 Yealink T27G phones Register with the Primary Server correctly and do not register with the Secondary Server (exactly what is expected)
Remove the Primary Server, and they all switch over to and register with the Secondary Server, bring the Primary Server online and within a short time, they are all registered back on the Primary server and deregistered with the Secondary Server

However I have 11 -13 of the T27G models that when brought online, they register to both Primary and Secondary (almost as though they are set to concurrent registration).

I have checked configuration, exporting the configuration from a unit that works correctly and one that does not - performed a diff and found no differences other than the password and extension number details.

Anyone else come across this issue....any thoughts....

Regards
Bob
(This post was last modified: 04-14-2019 05:10 AM by BobBluePackets.)
01-24-2019 12:45 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
T27G - Fall Back issues - Successive setting [Still an issue] - BobBluePackets - 01-24-2019 12:45 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T27G firmware phnau 1 32 05-21-2019 10:19 AM
Last Post: complex1
  Screen Default Back to Page 1 Kiwi 0 101 04-16-2019 01:22 AM
Last Post: Kiwi
Shocked SECURIY ISSUE: VC400 being brute forced and dont stop calling HenriqueMachado 1 356 01-04-2019 01:02 PM
Last Post: complex1
  Different users on the same phone on SIP-T27G econnet 2 536 01-02-2019 01:46 PM
Last Post: jolouis
  Hard Reset yealink T27G juanantonio.saez 0 421 11-30-2018 12:31 PM
Last Post: juanantonio.saez
  Transfer with T2XG and call back hercross 7 1,308 09-27-2018 09:21 PM
Last Post: jolouis
  T27G openvpn systems 3 1,297 09-24-2018 05:49 PM
Last Post: caldwell
  T27G randomly waking up, backlight on rcmcdonald91 4 1,774 06-15-2018 01:17 AM
Last Post: Samuel_Yealink
Exclamation Yealink Device Management issues Jonathan_01023 2 1,281 06-07-2018 01:24 AM
Last Post: Karl_Yealink
  Dial Now Rule Issue when Transfer IPBX 3 1,688 03-19-2018 04:26 PM
Last Post: IPBX

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication