[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Incoming Call Handling
Author Message
IsaacSchneider Offline
Junior Member
**

Posts: 10
Joined: Jun 2013
Reputation: 0
Post: #3
RE: Incoming Call Handling
(06-14-2013 01:53 PM)Yealink Support Wrote:  Hi Isaac,
I found you post many issues in the Forum Smile

I find that posting out in the open not only helps me but others as well to solve a particular issue. This also helps you the manufacturer create a better product, increase trust and brand perceptions.

(06-14-2013 01:53 PM)Yealink Support Wrote:  Could you let us know where are you from? And where you buy the phone from? So i can suggest special technical support team for you to provide a better support.
And you can also send the email to our support@yealink.com, thanks.

Based in the US, I have purchased thru many different authorized distributors.

Briefly after posting this message I found what i was looking for after poking around the phone for a bit.

To add additional call appearances:

  1. Login as admin to the phones webgui.
  2. Click on the "DSS Key" Tab on top.
  3. Click on the "Line Key 1-9" on the left.
    This will open the first 9 programmable softkeys.
  4. For each Line Key row is a slot as a Soft/Display key.
    The first column is the type of key, line,speeddial, blf, etc.
    In this case we select Line for the type.
  5. In the next column titled Value select float.
    The difference between float and fixed is when fixed is selected the key is always visible between screen pages.
  6. In the column titled Line this is the account to use. It is a bit confusing at first glance.
    (Yealink please change label from Line to Account.)
    So to create an appearance for Account 1 select Line 1, Account 2 select Line 2..etc.
  7. Repeat in each Line Key row for each call appearance you wish to add.
  8. Dont forget to press the Confirm button to save the settings.


That did it for me. Hope this helps someone else as well.

-Isaac
(This post was last modified: 06-16-2013 03:30 AM by IsaacSchneider.)
06-16-2013 02:41 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Incoming Call Handling - IsaacSchneider - 06-14-2013, 07:34 AM
RE: Incoming Call Handling - IsaacSchneider - 06-16-2013 02:41 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T43-U incoming calls do not land on the correct line/button rtfm2022 7 804 05-12-2022 05:41 PM
Last Post: rtfm2022
  T46 - Program Message Button for a Help call? harrys 0 403 03-31-2022 11:08 PM
Last Post: harrys
  Ended call still rings on receiver devices casi-online 2 3,116 08-05-2021 06:40 PM
Last Post: casi-online
  Rearrange in call buttons frichardson 0 1,673 06-16-2021 11:53 PM
Last Post: frichardson
  T41S: Bridge current call with a second incoming call digitel 1 2,686 05-21-2021 04:15 PM
Last Post: complex1
  Public Phonebook on incomming call Oliaargau 3 8,667 04-16-2021 05:34 PM
Last Post: Oliaargau
  Stop displaying Username on phone after call is connected rtilleman 1 3,469 04-06-2021 12:19 AM
Last Post: marcelm
  Call Park + Audible / Visual Alerts bdm 0 1,935 02-23-2021 04:24 AM
Last Post: bdm
  Call-Info sip header for T46G sidjf3zhdu 9 21,512 02-22-2021 04:06 PM
Last Post: jiansong
  Call Park works on T22 but not a T42 tbolick 1 2,607 01-29-2021 10:19 PM
Last Post: Yisroel_MongoTEL

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication