[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46 - Program Message Button for a Help call?
Author Message
harrys Offline
Junior Member
**

Posts: 4
Joined: Mar 2022
Reputation: 0
Post: #1
T46 - Program Message Button for a Help call?
Two questions please

1. Is it possible to program the Message button to dial an extension or dial out rather then default to message function?

2. IS there a way for this button (or if not, any button) to call a group of extension with a Call for help message,

Essentially we need a discrete panic button that will alert others in the building that help is needed.
- When the button is pressed no ringing or sounds should be made
-The group of receiving extension need to have a loud and imposing ringtone and message and must show the room the button was pressed in. It must not allow open two way chatting though as if the button is pressed by accident , a private conversation would be overheard.

Any suggestion on how this could be set up.


ADDENDUM
OK, So it was pretty easy to do in case anyone else wants to know. We dont use voice messages.

1. Setup the yeahlink to have Vocce message off (no voice message extension setup)
2. Set up an IVR on the cloud or onsite PBX with 1 min of no sound audio (can download the .wav file). The IVR is labled as HELP. The IVR should immediatly ring a call que with the phones that need to ring when help is needed. One of the phones in the que group is a loud ringer and flashing light (Buy it from Amazon)

When the IVR is triggered the phones ring with the caller ID showing as IVR name (HELP) and the Room location. THe extension with the loud ringer and lght notifies everyone at front reception.

When the Yeahlink Message button is pressed for the first time it asks for the Voice message dial extension, instead of adding the voice message no, add and save the Help IVR number.

From now on when in trouble the consultant can press the Message button , THey hear no sound on the loudspeak as they are listening to 1 min silence so the message is sent discretley with no ringing sound.

If anyone has a better idea or setup, please pipe up.
(This post was last modified: 04-13-2022 07:50 PM by harrys.)
03-31-2022 11:08 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
T46 - Program Message Button for a Help call? - harrys - 03-31-2022 11:08 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  cannot transfer to Park line button srcenturic 0 213 06-10-2022 01:41 AM
Last Post: srcenturic
  How to show caller Phone Number when call is forwarded gijoe 0 290 05-31-2022 07:40 PM
Last Post: gijoe
  T43-U incoming calls do not land on the correct line/button rtfm2022 7 1,564 05-12-2022 05:41 PM
Last Post: rtfm2022
  Phone message speed grstorga 0 505 04-08-2022 01:56 AM
Last Post: grstorga
  T48U - how to remove the DND button from main screen ckatz@bluip.com 1 1,921 11-10-2021 12:05 AM
Last Post: sbrammer
  T42S How to program envelope key? Fishgfingers 1 2,003 09-04-2021 01:31 AM
Last Post: kapetrosyan
  Ended call still rings on receiver devices casi-online 2 3,409 08-05-2021 06:40 PM
Last Post: casi-online
  Rearrange in call buttons frichardson 0 1,802 06-16-2021 11:53 PM
Last Post: frichardson
  T41S: Bridge current call with a second incoming call digitel 1 2,846 05-21-2021 04:15 PM
Last Post: complex1
  Public Phonebook on incomming call Oliaargau 3 8,941 04-16-2021 05:34 PM
Last Post: Oliaargau

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication