[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.

Post Reply 
Thread Rating:
  • 1 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Blind transfer not working on hangup bug
Author Message

Post: #2
RE: Blind transfer not working on hangup bug
(08-20-2019 06:45 PM)mrabbitt@clarkecounty.gov Wrote:  On my T52S phones running 84.0.10, I've noticed a bug where if I hang up the handset at a specific time to complete a blind transfer, the phone instead behaves like it's in an attended transfer. This causes another major issue which I'll get to after explaining the first one.

Here are some relevant config changes present on my phones:
Semi-attended transfer is disabled
Time Out for Dial Now Rule is set to 1

Reproducing the bug:
1. Answer a call taking the handset off hook
2. Press "Transfer" button and enter extension you want to transfer to
3. Hang up the handset after the Dial Now Rule timeout but before the transfer-to extension starts ringing

What you would expect to happen here is to have the call blind transfer. Instead, what happens is the phone goes into some kind of invalid attended transfer state where if you hang up the Yealink phone, the extension you transferred to will continue to ring. Once that call gets picked up or goes to voicemail, you will hear the audio play on the Yealink phone even though it is on the home screen and no longer in a call.

If you do the transfer and hang up before the Dial Now Rule timeout finishes or after the transfer-to extension starts ringing, the call blind transfers correctly.

Dear Customer ,

Good day ,this is Phil from Yealink Technical Support Team ,nice to meet you .

Please first to upgrade the version of T52S to newest version ,you can get newest firmware version from following address:


Try to reproduce the issue and see if it is still exits .

If yes ,

(1)Please help to duplicate the issue and show us a video so that we can have a better understanding of problem scenarios .

(2)Please provide the diagnostic files including A/B/C (A calls B ,B answer the call ,A and B establish the call ,B bind transfer A to C)for further analysis ,thanks in advance .

Here is a FAQ about how to get files :http://support.yealink.com/faq/faqInfo?id=707

Best Regards,

12-04-2019 04:33 PM
     Quote this message in a reply
Post Reply 

Messages In This Thread
RE: Blind transfer not working on hangup bug - anonymous1716473505469 - 12-04-2019 04:33 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  MP54 - 'Transfer' greyed-out MrCoops 3 1,429 03-13-2024 02:25 AM
Last Post: mjuliano
  WH67 (UC) Not Working for Outbound Calls Chepino96 0 1,093 10-04-2023 05:26 AM
Last Post: Chepino96
  Multicast Stops Working until Phone Rebooted Blake1 10 12,420 09-21-2023 05:47 PM
Last Post: axiompm
  set number key as speed dial key not working timotel 0 1,412 09-20-2023 06:51 AM
Last Post: timotel
  DND via XML notify not working in T48S :-( (works on T41x) wecloudit 0 965 09-18-2023 08:01 AM
Last Post: wecloudit
  Call history not showing the right information after an attended transfer wirelessmundi 5 13,276 08-15-2023 12:41 AM
Last Post: Yisroel_MongoTEL
  Yealink WH67 Control Buttons Not Working with Yeastar Linkus PC. nolto 4 5,468 01-15-2023 09:59 PM
Last Post: nolto
  MP50 - Teams Button not working SP3C5 4 10,081 12-09-2022 06:05 PM
Last Post: SP3C5
  Screen Saver Stops Working awilson@intermaxteam.com 3 5,753 02-13-2022 05:09 AM
Last Post: complex1
Bug T21P_E2 Google Contacts Sync not working anymore paolo.cresti 2 4,594 01-28-2022 11:43 PM
Last Post: paolo.cresti

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication