[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Multicast Stops Working until Phone Rebooted
Author Message
Blake1 Offline
Junior Member

Posts: 12
Joined: Apr 2018
Reputation: 0
Post: #1
Multicast Stops Working until Phone Rebooted
I've been having this issue with a few different models of Yealink phones on a few different customers for a while. We have car dealerships as customers, they send many pages per day, we have them sending the pages via Multicast to other Yealink phones and an Algo speaker device.

The issue is that it works fine for weeks, and then one day the phone will stop sending multicast pages, and we must reboot the phone to fix the issue. At first I thought it was something on the customer's network, but I keep running into this same issue with almost all of my customers that use multicast paging.

I have tried updating firmware from V83 -> 84 -> 85 -> 86 and I still see this where the phones must be rebooted after about 2 weeks for the paging to start working again. Every network this happens on is different switch vendor/model, from very basic 5 port switches to enterprise switches like Meraki/Aruba.

Anyone else having a similar issue?

My configuration looks like this:
Sending: linekey.10.type="24" linekey.10.value="" linekey.10.label="Page"

Receiving: multicast.listen_address.1.ip_address="" multicast.listen_address.1.label="Page"
06-01-2022 12:25 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
Multicast Stops Working until Phone Rebooted - Blake1 - 06-01-2022 12:25 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  set number key as speed dial key not working timotel 0 128 09-20-2023 06:51 AM
Last Post: timotel
  DND via XML notify not working in T48S :-( (works on T41x) wecloudit 0 154 09-18-2023 08:01 AM
Last Post: wecloudit
  Is there a way to get the incoming caller phone number with an Action URI? troy44 1 314 09-04-2023 01:46 PM
Last Post: Regend_Yealink
  Sending location information of Multicast Page elin@klhconsulting 3 1,054 06-19-2023 06:21 AM
Last Post: Yisroel_MongoTEL
  On MP50s responding to some phone trees ends the call TRK45 1 791 05-18-2023 04:46 PM
Last Post: complex1
  Import xml contacts to Yealink Phone upon provisioning via TFTP vusald 1 1,544 02-18-2023 06:30 PM
Last Post: complex1
  Yealink WH67 Control Buttons Not Working with Yeastar Linkus PC. nolto 4 3,487 01-15-2023 09:59 PM
Last Post: nolto
  W60B - URL for Remote Phone Book Bosstoad 2 1,950 01-06-2023 02:58 AM
Last Post: Bosstoad
  MP50 - Teams Button not working SP3C5 4 7,570 12-09-2022 06:05 PM
Last Post: SP3C5
  T33G Multicast stratos 2 1,777 11-18-2022 09:45 PM
Last Post: stratos

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication