[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 1 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Blind transfer not working on hangup bug
Author Message
mrabbitt@clarkecounty.gov Offline
Junior Member
**

Posts: 1
Joined: Mar 2019
Reputation: 0
Post: #1
Blind transfer not working on hangup bug
On my T52S phones running 84.0.10, I've noticed a bug where if I hang up the handset at a specific time to complete a blind transfer, the phone instead behaves like it's in an attended transfer. This causes another major issue which I'll get to after explaining the first one.

Here are some relevant config changes present on my phones:
Semi-attended transfer is disabled
Time Out for Dial Now Rule is set to 1

Reproducing the bug:
1. Answer a call taking the handset off hook
2. Press "Transfer" button and enter extension you want to transfer to
3. Hang up the handset after the Dial Now Rule timeout but before the transfer-to extension starts ringing

What you would expect to happen here is to have the call blind transfer. Instead, what happens is the phone goes into some kind of invalid attended transfer state where if you hang up the Yealink phone, the extension you transferred to will continue to ring. Once that call gets picked up or goes to voicemail, you will hear the audio play on the Yealink phone even though it is on the home screen and no longer in a call.

If you do the transfer and hang up before the Dial Now Rule timeout finishes or after the transfer-to extension starts ringing, the call blind transfers correctly.
(This post was last modified: 08-20-2019 06:53 PM by mrabbitt@clarkecounty.gov.)
08-20-2019 06:45 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Blind transfer not working on hangup bug - mrabbitt@clarkecounty.gov - 08-20-2019 06:45 PM
RE: Blind transfer not working on hangup bug - anonymous1711612242218 - 12-04-2019, 04:33 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  MP54 - 'Transfer' greyed-out MrCoops 3 814 03-13-2024 02:25 AM
Last Post: mjuliano
  WH67 (UC) Not Working for Outbound Calls Chepino96 0 847 10-04-2023 05:26 AM
Last Post: Chepino96
  Multicast Stops Working until Phone Rebooted Blake1 10 11,157 09-21-2023 05:47 PM
Last Post: axiompm
  set number key as speed dial key not working timotel 0 1,228 09-20-2023 06:51 AM
Last Post: timotel
  DND via XML notify not working in T48S :-( (works on T41x) wecloudit 0 784 09-18-2023 08:01 AM
Last Post: wecloudit
  Call history not showing the right information after an attended transfer wirelessmundi 5 12,643 08-15-2023 12:41 AM
Last Post: Yisroel_MongoTEL
  Yealink WH67 Control Buttons Not Working with Yeastar Linkus PC. nolto 4 4,959 01-15-2023 09:59 PM
Last Post: nolto
  MP50 - Teams Button not working SP3C5 4 9,471 12-09-2022 06:05 PM
Last Post: SP3C5
  Screen Saver Stops Working awilson@intermaxteam.com 3 5,319 02-13-2022 05:09 AM
Last Post: complex1
Bug T21P_E2 Google Contacts Sync not working anymore paolo.cresti 2 4,296 01-28-2022 11:43 PM
Last Post: paolo.cresti

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication