T46 call log - transferred calls.

[Jensen_Yealink]

(11-12-2017 08:02 AM)Chris Barron Wrote:  I have the problem previously related on another ticket.

Inbound call,l A party, is answered by station B. Station B supervised transfer to station C, who takes the call. Details of the A party number on the call should appear in the Call history log in station C. It does not.

Firmware is 28.82.0.20 and equivalent on other models.

any advice welcome

chris

My config is as follows:

************Call History & Dialling*******************
features.call_completion_enable = 0
features.call_log_show_num = 1
features.call_out_history_by_off_hook.enable = 1
features.caller_name_type_on_dialing = 2
features.history_save_display = 1
features.save_call_history = 1
features.save_init_num_to_history.enable = 1
features.save_original_num.enable =1
phone_setting.called_party_info_display.enable =1
transfer.save_initia_calllog.enable=1

Dear Chris,

I make some testing on my side, and failed to reproduced the issue:
How many phone with this issue?
Please reset the phone and testing again.
If still have issue, please provided the PCAP, config.bin and syslog with level 6.
Thank you