[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 1 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Multicast / Paging / Intercom - Yealink T58
Author Message
Chris708 Offline
Member
***

Posts: 63
Joined: Mar 2015
Reputation: 1
Post: #14
RE: Multicast / Paging / Intercom - Yealink T58
(07-12-2018 11:36 PM)Ryandh Wrote:  
(05-15-2018 09:32 PM)Chris708 Wrote:  
(10-16-2017 04:55 PM)Ryandh Wrote:  Any suggestions from anyone in the know? I'd appreciate anything that could be done to get this feature working.

I know this is a bit old but did you ever get a response back?

I've done multicast paging on yealinks and been able to get them to work.

No, unfortunately not. I tried until the wheels came off and gave up as a lost cause. Could you steer me in the right direction?
I'll give a try. At home right now so don't have the default Yealink Multicast IPs in front of me. I think one of them might be 224.0.0.1:10000. So, a Multicast IP consists of an IP address and a port...the port is 10000 in this case.

I'll explain setting it up through the phone GUI rather than a config file.
I am also using a Yealink T29G for my example so your Multicast IP settings may be in a different part of the GUI.
You will need two phones and they can both be set up with the same Multicast IP info. When one phone sends out a multicast page, even though it is listening on the same Address as other phones, it acts only to send a page.

We will use the Multicast IP 224.0.0.1:10000
In the phone GUI, under Directory / Multicast IP, there is a Listening Address list and a Paging List numbered 1 through 10. If your phone already has IP addresses in the locations then we can use those but, for simplicity sake, the IP address in listening list #1 should be the same IP address in the paging list in #1 and so on for the remaining #'s 2 through 10.
The Labels are just for ease of identification
For example
Listening Address #1: 224.0.0.1:10000 Label: Zone 1
Paging Address #1: 224.0.0.1:10000 Label: Zone 1
Listening Address #2: 224.0.0.1:10001 Label: Zone 2
Paging Address #2: 224.0.0.1:10001 Label: Zone 2

Make sure both phones have the same Multicast IP addresses and ports (for simplicity sake in testing).

Now, you need to set up a button to send a multicast page. In the phone's GUI, go to DSS Key Line Key. Some Yealinks have different verbage than 'Line Key'. Pick a key to change and make the changes noted below.
Select Multicast Page from the Type field.
In the Value field, type the IP address 224.0.0.1:10000
In the Label field, type Zone 1 (this is just an identifier) this could be renamed to Page All or PageFlr2.
Confirm the settings.
You should now see a button on the phone labelled Zone 1.
If you press this button, the other similarly configured phone should Beep once and you should be able to speak from your handset or speaker and hear it over the speaker of the other phone.

Hope I didn't make this too complicated.

One thing to note. The multicast paging will not normally transmit outside a firewalled subnet. I think it can be done but requires some type of translation/extra configuration.
(This post was last modified: 07-13-2018 02:31 AM by Chris708.)
07-13-2018 02:29 AM
Find all posts by this user    like3    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Multicast / Paging / Intercom - Yealink T58 - Adam_Yealink - 09-18-2017, 03:10 AM
RE: Multicast / Paging / Intercom - Yealink T58 - Chris708 - 07-13-2018 02:29 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Yealink C920 password issue DaveK 3 5,749 09-11-2020 12:02 PM
Last Post: complex1
  Modern Yealink Phonebook Generation Tool rgranholm 2 6,144 04-30-2020 09:03 PM
Last Post: rgranholm
  YEALINK AUTO PROVISION Dmitryche 1 3,427 08-09-2019 09:25 AM
Last Post: Paz_Yealink
Question 3CX / Yealink passthrough VLAN issue (when phone is rebooted) maindriver 3 5,000 08-01-2019 12:19 PM
Last Post: Evan_Yealink
  Multicast Paging - Metaswitch EPP missing "Channel" ahull 1 3,617 11-27-2018 12:57 PM
Last Post: ahull
  Yealink Dialplan Alain 0 3,018 09-19-2018 05:10 PM
Last Post: Alain
  MultiCast Paging CP860 admin.calgary.demac 4 10,056 09-02-2018 04:34 AM
Last Post: Infotec
  Yealink T48S displays message "No service" David K L 1 5,828 04-17-2018 03:39 AM
Last Post: Paul_Yealink
  Yealink Dial Plan RobertCrawford 8 13,406 03-09-2018 06:38 AM
Last Post: Johnny88
  Multicast options not in manual USTI 1 4,120 01-18-2018 10:22 AM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication