[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
3CX / Yealink passthrough VLAN issue (when phone is rebooted)
Author Message
maindriver Offline
Junior Member
**

Posts: 5
Joined: Jul 2019
Reputation: 0
Post: #1
Question 3CX / Yealink passthrough VLAN issue (when phone is rebooted)
Hi,

This is an example how our network works.

VLAN50 = vlan for phones
VLAN80 = vlan for computers connected to phones

Switch port is set to
50 untagged, 80 tagged.

In 3cx for the Phone Provisioning, VLAN Configuration, Enable VLAN for PC PORT 80

If I connect a phone up, it gets the correct settings, works on VLAN50 etc. Connecting a PC to the PC port after the phone has booted, will result in the PC being on VLAN80. However if we then reboot the phone, the PC port will at first be given VLAN50, we are then required to disconnect and reconnect the network cable to rest the network connection of the PC to get the correct VLAN.

Is there a way of telling the Yealink phones to hold off sending traffic to the PC port until the phone has fully booted? It seems to act as a dumb switch until it has booted and provisioned fully.


This is in a 150+ phone/pc set up, so making any other changes to the switches / configuration would be a real pain.

Thanks in advance.

3cx version
Professional Perpetual 15.5.15502.6License

Phones
Yealink T42S fw 66.83.0.55
Yealink T19P_E2 fw 53.83.0.55
07-30-2019 01:17 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
3CX / Yealink passthrough VLAN issue (when phone is rebooted) - maindriver - 07-30-2019 01:17 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Yealink T28 setup audible ring on 2nd incoming call JeffWilkinson 20 85,970 10-18-2023 12:59 PM
Last Post: sles
  2-way paging with no indication on phone nolto 1 1,701 05-11-2023 11:20 PM
Last Post: Yisroel_MongoTEL
  keypad sequence for Forward & DND with Yealink W70B Base kargah 0 1,176 04-18-2023 10:07 PM
Last Post: kargah
  T57W - Using the Phone Directory bill@wesimplifyit.com 0 1,051 04-14-2023 12:41 AM
Last Post: bill@wesimplifyit.com
  W70B - 3CX phone book is not displayed completely ChrisGER 1 4,712 03-19-2023 07:31 PM
Last Post: thomas32
  Yealink T27P -Incoming call issue rsarceno 0 1,222 01-25-2023 08:54 AM
Last Post: rsarceno
  Yealink T19 can not automatically hangup inbound calls giaopc94 0 1,597 08-01-2022 09:28 AM
Last Post: giaopc94
  Configuring OPENVPN with Yealink Commensus 0 2,447 02-23-2022 09:45 PM
Last Post: Commensus
  Limit maximum of active calls per phone elastalink 5 14,986 09-09-2021 03:52 AM
Last Post: kapetrosyan
  Read specific variable from phone configuration saivo 0 3,451 06-13-2021 05:23 PM
Last Post: saivo

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication