[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
keypad sequence for Forward & DND with Yealink W70B Base
Author Message
kargah Offline
Junior Member
**

Posts: 1
Joined: Apr 2023
Reputation: 0
Post: #1
keypad sequence for Forward & DND with Yealink W70B Base
Hi there! I hope this is the right place to ask my question.

I have a Yealink W70B Base with a W56H handset. Firmware-Version of base is W70B-146.85.0.40 and Hardware-Version 146.0.0.0.2.0.0. Handset Version is 61.85.0.55.
The Sip Account is registered at an Unifi Openstage business telephone system with SW-Version osbiz_v3_R1.1.0_302.

With wired phones like OpenScape Desk Phone CP 200 or wireless like Gigaset S3 professional, it is possible to use a special keypad sequence for switching on/off Always Forward, Busy Forward, No Answer Forward feature, if a feature called "Associated Choices/Services" (Assoziierte Wahl/Dienste) is activated at telephone system. To switch Always Forward on, the keypad sequence is *11[Destination Number], to switch off #11.

Now I want to switch on and off the Always Forward feature by using the keypad with the W56H Handset as discribed above.
If I do so, I receive Not Available on the display.

The feature is described in Yealink W70B IP DECT Phone Administrator Guide V85.40.pdf at page 120.

In the webbased backend I found this
[Image: Screenshot 2023-04-13 164315.jpg]

I insert *11 or #11 into the On/Off Code fields, but it is not working.

I know that it is possible to use the handsets GUI for configuring the Forward features. [OK]+[Call Features]+[Call Forward...]
This works as expected, but me and the other users are used to use the keypad...

Can anyone give me a hint, how to adapt the configuration or the keypad sequence for the W70B Base to get it to work?
(This post was last modified: 04-18-2023 10:08 PM by kargah.)
04-18-2023 10:07 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
keypad sequence for Forward & DND with Yealink W70B Base - kargah - 04-18-2023 10:07 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Yealink T48S URL Line Key jogi29 1 414 06-10-2024 08:12 PM
Last Post: jogi29
  Yealink T28 setup audible ring on 2nd incoming call JeffWilkinson 20 90,651 10-18-2023 12:59 PM
Last Post: sles
  Grandstream HT813 FXO to W70B rainecc 11 6,246 09-12-2023 01:05 AM
Last Post: daven@telxpress.com
  W70B - 3CX phone book is not displayed completely ChrisGER 1 5,418 03-19-2023 07:31 PM
Last Post: thomas32
  Yealink T27P -Incoming call issue rsarceno 0 1,556 01-25-2023 08:54 AM
Last Post: rsarceno
  Dial Plan on W70B feedgenic 0 1,837 10-03-2022 04:58 PM
Last Post: feedgenic
  Yealink T19 can not automatically hangup inbound calls giaopc94 0 1,983 08-01-2022 09:28 AM
Last Post: giaopc94
  W70B - Associate Dialed Number with SIP Account karibi 1 4,149 06-15-2022 09:40 AM
Last Post: Cedric
Question 3CX / Yealink passthrough VLAN issue (when phone is rebooted) maindriver 4 12,639 03-24-2022 10:25 PM
Last Post: maindriver
  Configuring OPENVPN with Yealink Commensus 0 2,800 02-23-2022 09:45 PM
Last Post: Commensus

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication