T27G & Panasonic NS500 BLF

[Christiaan]

(05-09-2017 09:22 AM)Klaus Wrote:  Hi,

do you mean when you configure a BLF dsskey，BLF LED will not show correct status or LED will not light?

In the meantime, you can refer to below FAQ to try to fix this issue:

http://support.yealink.com/faq/faqInfo?id=131

http://support.yealink.com/faq/faqInfo?id=264

http://support.yealink.com/faq/faqInfo?id=198

If above FAQ can not fix this issue, please reply with the detail info about this issue and help me get the level 6 system log, config.bin file and PCAP traces

About how to get these files, please refer to this FAQ:

http://support.yealink.com/faq/faqInfo?id=311

BR

klaus

Hi Klaus

You are correct. The BLF LED will not show correct status and the LED will not light.

---

I tried all of the above, but it does not work.

Please let me know if you have any more questions.

I have attached all the files as requested.