[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46G TIME Calculation Problem
Author Message
briankelly63 Offline
Member
***

Posts: 55
Joined: Jul 2013
Reputation: 1
Post: #1
Exclamation T46G TIME Calculation Problem
I first noticed this because the call history was showing calls as "YESTERDAY" even though they were just received.

The problem affects both manual and automatic time setting but differently.

To see the issue go to Settings->Time & Date
then Enable "Manual Time".

You will be unable to set the time to 23 hours. It will change to 0

If you set it for 22 and save it the display will show 23. Set it to 21 it will show 22.

Internally this error corrupts the calculation from the time server and DST and because of that calls in the "History" log of the phone will show as "YESTERDAY".

There really is no work around unless you want to set the wrong time.
(This post was last modified: 07-25-2013 11:30 AM by briankelly63.)
07-25-2013 11:07 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #2
RE: T46G TIME Calculation Problem
Hi Brian,
What's the firmware are you using?
Here i am use the firmware 28.71.0.85, and it works well.
ftp://yealinkftp:yealinkftp@ftp.yealink....1.0.85.rom
Could you check again?
Thanks.


Attached File(s) Thumbnail(s)
   
07-25-2013 02:17 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
briankelly63 Offline
Member
***

Posts: 55
Joined: Jul 2013
Reputation: 1
Post: #3
RE: T46G TIME Calculation Problem - VIDEO sent to Support
This is a nasty little bug that changes depending what you do in the UI screen. It is also dependent on whether the phone is configured or not.

I am using the same firmware as you.

If I try and set the values to the same exact values that are included in your picture and then hit Confirm two things happen. The first is that the day changes from 25 to 26 and the Hour changes to 0.

Please look at the attachment.

I just tried the same thing with another T46G running the same firmware and it INITIALLY it worked properly.

BUT If you change the DHCP Time setting on the time screen or change the Date Format from YYYY-MM-DD to WWW-MM-DD and then try to store a 23 in the hour box lots of strange things start to happen

So I did a factory reset on the phone in question and then re-tested. The time setting then works correctly BUT If I Import the previously Exported configuration the problem returns.

So it would seem there is a corruption issue that is preserved during an Export - Import.

I did another factory reset but DID NOT reload my configuration. In this case the settings work properly and the UI allows me to set 23 as the hour no matter what the other settings happen to be.

I will send you the config.bin that I am using so you can load it and test what is happening.

Something is being corrupted by my configuration. The only unusual thing in my configuration is that I have a VPN file set loaded. It is NOT enabled but it is loaded.

CONFIG.BIN FILE HAS BEEN SENT TO YOUR SUPPORT EMAIL ALSO INCLUDED IS A VIDEO OF THE ISSUE


Attached File(s) Thumbnail(s)
   
(This post was last modified: 07-25-2013 10:18 PM by briankelly63.)
07-25-2013 08:54 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #4
RE: T46G TIME Calculation Problem
Hi Brain,
Thanks for your config.bin and video, support.usa guy already submit this to R&D, any update they will let you know.
07-31-2013 03:55 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
rrnworks Offline
Junior Member
**

Posts: 3
Joined: Nov 2014
Reputation: 0
Post: #5
RE: T46G TIME Calculation Problem
We're seeing the same problem on a brand new yealink T42G - the time on the phone shows correctly but all outgoing and incoming calls show YDay in the History (even though they were made today)?
(This post was last modified: 11-24-2014 08:44 AM by rrnworks.)
11-24-2014 08:37 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jeanpierre26 Offline
Junior Member
**

Posts: 1
Joined: Dec 2018
Reputation: 0
Post: #6
RE: T46G TIME Calculation Problem
Hi

I'm having the same problem here in Australia (time zone +10)
In the history screen calls are shown as yesterday instead of today.

Was there any resolution for this issue?

We have T29G phones fw 46.83.0.35, using DHCP and NTP for time server

Please let me know

thanks
12-06-2021 10:09 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Problem with T54W Yealink aarontate 0 191 05-06-2024 11:10 AM
Last Post: aarontate
  How to remotely check time is correctly set ? oliv 2 2,513 05-22-2023 05:45 PM
Last Post: oliv
  WH67 Headset Problem gr0mit 0 1,641 10-20-2022 10:00 PM
Last Post: gr0mit
  Problem of OpenVPN simonleung 0 1,979 04-26-2022 02:24 PM
Last Post: simonleung
  V83 and openvpn problem avayax 12 25,085 03-04-2022 12:10 AM
Last Post: rfrantik@rfcinc.com
  Custom Dialing T46G sfrazier 2 6,137 01-17-2022 02:09 AM
Last Post: sfrazier
  Problem with BW directory privacy Jorge Luis 0 2,650 06-29-2021 02:04 AM
Last Post: Jorge Luis
  W80 - Problem with sync level Samy_Lahmar 1 8,335 02-18-2021 07:01 AM
Last Post: bitblock
  PROBLEM AFTER UPDATE W80B TreIngenia 1 6,826 06-26-2020 02:38 PM
Last Post: Yisroel_MongoTEL
  Problem with phones certificate proof 3 10,702 05-26-2020 02:36 PM
Last Post: Lewis-H

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication