W80 - Problem with sync level

[Samy_Lahmar]

Hello,

I have a problem with the configuration of the W80 DECT base station.

I added 3 W80B to my W80DM controller.

The terminals are configured in the same cluster, and we have different synchronization levels (sync 1 for base 1, sync 2 for base 2, sync 2 for base 3).

The problem is that my phones don't synchronize anymore if I cut the base 1 that has sync level 1.

Knowing that only one terminal can be put in sync 1, I find myself having to manually change the level of the base in case of failure, which is not viable.

In your documents you say this:

A base station always synchronizes itself with a base station that has a higher sync level.
If it detects several base stations with a higher sync level, it synchronizes itself with the base station that has thestrongest signal.
If it does not detect any base station with a higher sync level, it cannot synchronize.

If the base in sync 1 no longer works, the higher level base becomes the base in sync 2, and the phone should be able to provision itself on it.

Can you tell me if this problem is normal?

Regards,

Samy