T46G and openvpn

[gradyent]

Hi I'm relatively new at T46's but I know even less about configuring them for VPN. I have used both the openvpn and the yealink guides with a t46 and t28 model ip phone. I have not been able to successfully connect either of the phones to the vpn. Is there a better guide than the sunnystate guide. I've followed that one too and to no avail. Or is someone able to walk me through what I'm doing wrong?


Thanks V/R
Gradyent

[Flora_Yealink]

Hi Gradyent,
Have you checked below guide ?
http://support.yealink.com/attachmentDow...29_V71.pdf

and please let us know whether you install the openvpn server, if yes, please make sure the client file for the phone are correct .
if the server is not installed by yourself, please contact your server administrator or you can send use the client file , config.bin file , pcap trace and level 6 syslog for debug.
you can refer to below for how to catch these information.
http://forum.yealink.com/forum/showthread.php?tid=1319
Best Regards!
Flora

[brunski]

Hi Flora,
I'm new here. I'd like to know how to do the open vpn as well, the link you sent, (http://support.yealink.com/attachmentDow...E2%80%8B_) gives me a corrupt pdf.

Could you please check that file? thanks!

Brunski

[Flora_Yealink]

Hi Brunski ,
sorry for it , please use link,
http://support.yealink.com/attachmentDow...Phones.pdf

[gradyent]

The requested information

[Flora_Yealink]

Hi ,
Thanks for your information, please let us know the details scenario in your side .
After import the vpn file to the phone, the phone won't show the Vpn icon on the screen ,right?

Best Regards!
Flora

[gradyent]

Yea, thats right no VPN icon on either display.

My goal is to set it up and have it work.

My scenario:
LAN 192.168.200.0/24 (This is my WAN side of pfSense as well as where the VPN Client phone hostnet)

LAN 192.168.1.0/24 (LAN provided by pfSense and the PBX hostnet)

Tunnel Network for VPN set to 192.168.2.0/24

Do you need anything else about my scenario...?

[gradyent]

I haven't heard anything from the thread in a week, I am wondering is anyone still helping me with this. I got the VPN icon to show up on Friday when I disabled all the security options in pfSense, but my phone still did not connect to the Elastix server on the other side of the firewall.