Rename "Send" softkey

[zapata]

Hi,

We're using T41P phones with FW 36.71.0.60. Once we implemented Auto-provisioning (only common file: y000000000036.cfg), we noticed that the "Dial" (or "Send") softkey that appears while dialing a number changed to "Send_BUTTON", which looks ugly and confuses business users.

My question is: How can we change the label of the "Send" softkey?

P.S. We could not find any related parameter in the documentation and config file.

[Bryan Nelson]

There was similar issue with the T-19 in some firmware versions. I would try the latest firmware, as I don't seem to have this problem running it.

[Yealink_Jim]

Hi,
Given below is the configuration parameters:

---------------------------
#!version:1.0.0.1
phone_setting.custom_softkey_enable = 1
#Customize the softkeys presented on the phone LCD screen when Callfailed, Callin, Connecting, Dialing, Ringback and Talking.
#Before using these parameters, you should store the desired XML files to the provisioning server.
custom_softkey_dialing.url =
----------------------------

Given below is the Auto provisioning template:

ftp://Jim:v2R88xcL@ftp.yealink.com/ftp/Y..._V1.5.xlsx

You can refer to below guide for more information:

http://www.yealink.com/Upload/T4X/201401..._V72_1.pdf

Hope this helps!

[Wengel]

At least in T42 the keyword in the language file is not "Send_BUTTON" but "Send".
In other words your entry in your language file should be:
"Send"="Dial"

In my language file the "Send" keyword was not present, I had to insert it myself, but it worked fine doing so :-)

By the way, if any of you Yealink guys are reading this, I find it misleading that you call this button "Send".....wouldn't it be more understandable to the user if it was called "Dial" or "Call" :-P

[Michael_Yealink]

hi Wengel

thanks so much for your information and advise .

for this advised , we will collect this request and submit to R&D for evaluation .

at the same time, i think the auto provision solution can also help to solve this issue

TKS & BR

Michael