+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: Rename "Send" softkey (/showthread.php?tid=2594)
Rename "Send" softkey - zapata - 10-20-2014 03:19 PM
Hi,
We're using T41P phones with FW 36.71.0.60. Once we implemented Auto-provisioning (only common file: y000000000036.cfg), we noticed that the "Dial" (or "Send") softkey that appears while dialing a number changed to "Send_BUTTON", which looks ugly and confuses business users.
My question is: How can we change the label of the "Send" softkey?
P.S. We could not find any related parameter in the documentation and config file.
RE: Rename "Send" softkey - Bryan Nelson - 10-21-2014 02:05 AM
There was similar issue with the T-19 in some firmware versions. I would try the latest firmware, as I don't seem to have this problem running it.
RE: Rename "Send" softkey - Yealink_Jim - 10-21-2014 04:42 PM
Hi,
Given below is the configuration parameters:
---------------------------
#!version:1.0.0.1
phone_setting.custom_softkey_enable = 1
#Customize the softkeys presented on the phone LCD screen when Callfailed, Callin, Connecting, Dialing, Ringback and Talking.
#Before using these parameters, you should store the desired XML files to the provisioning server.
custom_softkey_dialing.url =
----------------------------
Given below is the Auto provisioning template:
ftp://Jim:v2R88xcL@ftp.yealink.com/ftp/Yealink_TR069_DataModel_V1.5.xlsx
You can refer to below guide for more information:
http://www.yealink.com/Upload/T4X/20140102/Yealink_SIP-T2_Series_T19P_T4_Series_IP_Phones_Auto_Provisioning_Guide_V72_1.pdf
Hope this helps!
RE: Rename "Send" softkey - Wengel - 02-20-2017 02:40 PM
At least in T42 the keyword in the language file is not "Send_BUTTON" but "Send".
In other words your entry in your language file should be:
"Send"="Dial"
In my language file the "Send" keyword was not present, I had to insert it myself, but it worked fine doing so :-)
By the way, if any of you Yealink guys are reading this, I find it misleading that you call this button "Send".....wouldn't it be more understandable to the user if it was called "Dial" or "Call" :-P
RE: Rename "Send" softkey - Michael_Yealink - 02-26-2017 08:06 AM
hi Wengel
thanks so much for your information and advise .
for this advised , we will collect this request and submit to R&D for evaluation .
at the same time, i think the auto provision solution can also help to solve this issue
TKS & BR
Michael