How to Autoprovision Remote Phonebook in Asterik/Bicom

[dnetit]

Is there a way to autoprovision the Remote Phonebook option in the directory?

We have tried pasting the XML values in all of the autoprovision templates with no luck.



Thank you.

Chris

[Klaus_Yealink]

Hi

Thanks for your information.

For your problem,please follow the below steps:

1、Eidt the XML file,ensure your template is correct,please refer to the below:

<YealinkIPPhoneDirectory>

<DirectoryEntry>
<Name>XXX</Name>
<Telephone>xxx</Telephone>
<Telephone>XXXXX</Telephone>
</DirectoryEntry>

<DirectoryEntry>
<Name>XXX</Name>
<Telephone>XXX</Telephone>
<Telephone>XXXXXXXX</Telephone>
</DirectoryEntry>

</YealinkIPPhoneDirectory>

2、add the xml file to the server side

3、edit the cfg file,the sentence like below:

remote_phonebook.data.x.url=

remote_phonebook.data.x.name=

replace "x" with the account you want to set up!

for mor information,please refer to the Auto provisioning guide，you can download the guide from below link:

http://support.yealink.com/documentFront...umentId=16

klaus

[davebenwell]

Hi Chris,

Was not aware Bicom supported this! but yes its possible as we do it on our hosted PBX which is not Bicom but our own Asterisk Multi-Tentant.

[jcaruso]

I just deployed a provisioned phonebook for a customer today on our PBXWare (Bicom) system.

Create your contact.xml file according to Klaus' instructions. Upload it to the /opt/pbxware/pw/tftp directory on the Bicom server (or whatever directory your tftp server is pointing to)

In your Yealink UAD add this line:
local_contact.data.url = tftp://yourdomainhere.com/contact.xml

[anonymous1718628087441]

But of course, if you listened to the training you had from them. TFTP service is disabled by default on your pbx. Check your settings.

[morbidpete]

We just check the box for Directory in OSC under the tenant settings for PBXWare multi-tenant version. Don't need to do anything with the UAD

[anonymous1718628087441]

If you use the autoprovision, the only thing you need to do for the remote directory is from the attached image.

[morbidpete]

Have you verified your XML is setup for the remote phone book? It differs from the local phone book. I think posting your phone book (cleaned of sensitive info) along with the provisioning line would help troubleshoot.