How to Autoprovision Remote Phonebook in Asterik/Bicom - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Auto Provisioning (/forumdisplay.php?fid=14) +--- Thread: How to Autoprovision Remote Phonebook in Asterik/Bicom (/showthread.php?tid=10962) |
How to Autoprovision Remote Phonebook in Asterik/Bicom - dnetit - 10-21-2015 04:57 AM Is there a way to autoprovision the Remote Phonebook option in the directory? We have tried pasting the XML values in all of the autoprovision templates with no luck. Thank you. Chris RE: How to Autoprovision Remote Phonebook in Asterik/Bicom - Klaus_Yealink - 10-21-2015 06:18 AM Hi Thanks for your information. For your problem,please follow the below steps: 1、Eidt the XML file,ensure your template is correct,please refer to the below: <YealinkIPPhoneDirectory> <DirectoryEntry> <Name>XXX</Name> <Telephone>xxx</Telephone> <Telephone>XXXXX</Telephone> </DirectoryEntry> <DirectoryEntry> <Name>XXX</Name> <Telephone>XXX</Telephone> <Telephone>XXXXXXXX</Telephone> </DirectoryEntry> </YealinkIPPhoneDirectory> 2、add the xml file to the server side 3、edit the cfg file,the sentence like below: remote_phonebook.data.x.url= remote_phonebook.data.x.name= replace "x" with the account you want to set up! for mor information,please refer to the Auto provisioning guide,you can download the guide from below link: http://support.yealink.com/documentFront/forwardToDocumentDetailPage?documentId=16 klaus RE: How to Autoprovision Remote Phonebook in Asterik/Bicom - davebenwell - 11-11-2015 08:51 PM Hi Chris, Was not aware Bicom supported this! but yes its possible as we do it on our hosted PBX which is not Bicom but our own Asterisk Multi-Tentant. RE: How to Autoprovision Remote Phonebook in Asterik/Bicom - jcaruso - 12-17-2015 04:26 AM I just deployed a provisioned phonebook for a customer today on our PBXWare (Bicom) system. Create your contact.xml file according to Klaus' instructions. Upload it to the /opt/pbxware/pw/tftp directory on the Bicom server (or whatever directory your tftp server is pointing to) In your Yealink UAD add this line: local_contact.data.url = tftp://yourdomainhere.com/contact.xml RE: How to Autoprovision Remote Phonebook in Asterik/Bicom - anonymous1718628087441 - 02-11-2016 10:41 AM But of course, if you listened to the training you had from them. TFTP service is disabled by default on your pbx. Check your settings. RE: How to Autoprovision Remote Phonebook in Asterik/Bicom - morbidpete - 01-20-2017 09:48 PM We just check the box for Directory in OSC under the tenant settings for PBXWare multi-tenant version. Don't need to do anything with the UAD RE: How to Autoprovision Remote Phonebook in Asterik/Bicom - anonymous1718628087441 - 01-20-2017 10:20 PM If you use the autoprovision, the only thing you need to do for the remote directory is from the attached image. RE: How to Autoprovision Remote Phonebook in Asterik/Bicom - morbidpete - 01-24-2017 02:15 PM Have you verified your XML is setup for the remote phone book? It differs from the local phone book. I think posting your phone book (cleaned of sensitive info) along with the provisioning line would help troubleshoot. |