Can't Auto Provision W52P

[stevez]

Apparently I cannot email you my current .cfg. It appears my ISP is being blocked by a spam filter (cblless.anti-spam.org.cn)...

So, I'll copy and paste it here, account info redacted. This is my minimal config just to be able get an account on it to make a call.

#!version:1.0.0.1

##File header "#!version:1.0.0.1" can not be edited or deleted.##

######################################################
## Network ##
######################################################

#Configure the WAN port type; 0-DHCP (default), 1-PPPoE, 2-Static IP Address;
#Require reboot;
network.internet_port.type = 0

#Configure the PC port type; 0-Router, 1-Bridge (default);
#Require reboot;
network.bridge_mode = 1

################################
#### Account Settings
################################
#Enable or disable the account 0-Disabled (default), 1-Enabled;
account.1.enable = 1

#Configure the label displayed on the LCD screen for account.
account.1.label = 103

#Configure the display name of account.
account.1.display_name = 103

#Configure the username and password for register authentication.
account.1.auth_name = <username>
account.1.password = <password>

#Configure the register user name.
account.1.user_name = <username>

#Configure the SIP server address.
account.1.sip_server_host = <server address>

#Specify the port for the SIP server. The default value is 5060.
account.1.sip_server_port = 5060

#Configure the voice mail number of account.
voice_mail.number.1 = *103

#Configure the register expiry time (in seconds), the default value is 3600.
account.1.expires = 300

#Enable or disable the phone to subscribe the message waiting indicator; 0-Disabled (default), 1-Enabled;
account.1.subscribe_mwi = 1

#Configure MWI subscribe expiry time (in seconds). It ranges from 0 to 84600, the default value is 3600.
account.1.subscribe_mwi_expires = 300

#Configure the SIP server type; 0-Default (default), 2-BroadSoft, 4-Cosmocom;
account.1.sip_server_type = 0