New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46S - call forward target (number) on display
Author Message
mikedonn Offline
Junior Member
**

Posts: 2
Joined: May 2019
Reputation: 0
Post: #3
RE: T46S - call forward target (number) on display
(07-15-2019 02:21 PM)East_Yealink Wrote:  
(06-04-2019 10:36 AM)mikedonn Wrote:  Hi All,

Is there any way on T46S to the get the Call Forward target number visible on the display?

Currently I can only see an indication that the phone has call forwarding active (the small orange curved arrow on top of the display) and when I want to know where the phone is forwarded to I have to go via the menu.

Thanks
Mirek

Hi Mirek,

If you are using Always Forward feature, I recommend to set up a DSS Key with type "forward". You can modify the lable you want to use.

For example, if you set up two DSS Keys, key 1 to Bill and key 2 to Tom, after pressing key 1 to activate always forward and forward all calls to Bill, you can press the key 1 to deactivate always forward, or press key 2 to switch the forward target and forward all calls to Tom.

Best Regards,
East

Hi East,

Thanks for your reply, we did that already. I hoped that there is some way to get the forwarded target (phone) number somewhere on top of the display eg next to the active forward icon, so that it would be always visible. We already have a lot of DSS keys configured on each phone (15 or more on each device) so we have to switch between screens.

Best regards,
Mirek
07-15-2019 02:43 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: T46S - call forward target (number) on display - mikedonn - 07-15-2019 02:43 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Skype for Business contact called by e-mail and not phone number primator 0 38 09-10-2019 02:08 PM
Last Post: primator
  T46S voicemail key not working (off hook) Advance2000 6 635 08-31-2019 07:29 AM
Last Post: rithvik
  T42S do not display icon in YealinkIPPhoneStatus line oliv 2 138 08-26-2019 06:15 AM
Last Post: oliv
  Best practices to notify unconditional call forwarding with Asterisk oliv 1 104 08-16-2019 10:07 PM
Last Post: jolouis
  Forward certain phone #'s only Chris708 4 670 08-11-2019 07:04 PM
Last Post: Chris708
  T46S Holding OK button allows factory reset S J 4 8,808 08-01-2019 01:50 PM
Last Post: 4th Dimension
  T46S with Speaker with a cross over it icon ama 2 204 07-21-2019 09:44 PM
Last Post: ama
  Transferring calls on Kixie using the T46S Ianlindgren 1 504 07-11-2019 01:04 PM
Last Post: Jacky_Yealink
  T48g and t48s "Sharing" a call for training/QC rzei 2 386 06-27-2019 01:20 PM
Last Post: jolouis
  Changing the Hold function t46S Kala 1 291 06-24-2019 03:16 AM
Last Post: Simons_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication