New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit :

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Some XML help required
Author Message
Eric.GoodAdvice Offline
Junior Member

Posts: 3
Joined: Sep 2018
Reputation: 0
Post: #1
Some XML help required
Concerning a TP41P phone.

The PBX does not support provisioning or the forward status by the phone, so i've been setting up XML to dial DTMF to set a static forward.
I have this working as far as the dialing goes, but some other specifics are wanted by the customer.

<?xml version="1.0" encoding="ISO-8859-1"?>
<YealinkIPPhoneExecute Beep="yes">
<ExecuteItem URI="Led:SMS=on"/>
<ExecuteItem URI="Key:HANDFREE"/>
<ExecuteItem URI="Dial:*21*phonenr*" interruptcall="no"/>

So, the thought process here is:
- Turn on LED so we have an indicator
- Press Handfree key to dial
- dial number

The only thing working now, is that the number is dialed in the display.
The customer has to pick up the horn to make the forward complete.
After, the handfree is enabled, and the customer gets some beeps over the speaker that the forward has succeeded.
The Led does not turn on.

The PDF does not state i have to imply a color when using either the SMS or POWER LED, is this mistaken? Do i have to put a GREEN/ORANGE/RED like the line options have?
How can i make the Phone dial the number without the customer having the pickup? Should i put the handfree and dial in one statement?
Would: <ExecuteItem URI="Key:HANDFREE" "Dial:*21*phonenr*"/> work?

I cannot test these functions because i don't have a phone, so i have to do all this in a live environment Sad

Any help would be greatly appreciated.
(This post was last modified: 10-03-2018 10:59 AM by Eric.GoodAdvice.)
10-03-2018 10:59 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
Some XML help required - Eric.GoodAdvice - 10-03-2018 10:59 AM
RE: Some XML help required - jolouis - 10-05-2018, 07:32 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Provisioning Issue auto_provision.power_on = 1 required for Sip Notify Frank Drews 3 3,682 07-17-2015 11:12 PM
Last Post: Frank Drews

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication