[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 2 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46G: Power LED always flashing when backlight is off
Author Message
Louis6321 Offline
Junior Member
**

Posts: 10
Joined: Nov 2016
Reputation: 0
Post: #71
RE: T46G: Power LED always flashing when backlight is off
Travis, I just had a look at the screenshot you attached. Can you explain what the two settings mean please?
03-24-2017 01:22 PM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
Travis_Yealink Offline
Super Moderator
******

Posts: 171
Joined: Mar 2016
Reputation: 1
Post: #72
RE: T46G: Power LED always flashing when backlight is off
(03-24-2017 01:22 PM)Louis6321 Wrote:  Travis, I just had a look at the screenshot you attached. Can you explain what the two settings mean please?

Hi,

If you set as the screenshot, the power saving LED light will be turn off, and if you set 100 on these two options both, the light will light for 100ms and dark for 100ms, if you set them 0 both, the LED light will always ON, is it clear enough for you?

regards,
Travis
03-24-2017 03:42 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Louis6321 Offline
Junior Member
**

Posts: 10
Joined: Nov 2016
Reputation: 0
Post: #73
RE: T46G: Power LED always flashing when backlight is off
(03-24-2017 03:42 PM)Travis Wrote:  If you set as the screenshot, the power saving LED light will be turn off, and if you set 100 on these two options both, the light will light for 100ms and dark for 100ms, if you set them 0 both, the LED light will always ON, is it clear enough for you?

Perfect, thank you Smile
03-24-2017 03:54 PM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
Jazzy Offline
Junior Member
**

Posts: 8
Joined: Mar 2017
Reputation: 0
Post: #74
RE: T46G: Power LED always flashing when backlight is off
(03-24-2017 03:33 AM)Travis Wrote:  Dear all,

Really sorry for the inconvenience brought to you.

Yealink already release a new T46G firmware version to fix this issue, please download from below link and have a test:

Since updating my phone the light no longer flashes but the LCD doesn't go completely dark, it seems to still be very faintly lit.. I've not changed any other settings and this wasn't the case with the previous firmware... ideally I would like the phone to be completely dark when in power saving mode..
(This post was last modified: 03-26-2017 12:09 PM by Jazzy.)
03-26-2017 12:07 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Werner1959 Offline
Member
***

Posts: 70
Joined: Nov 2016
Reputation: 0
Post: #75
RE: T46G: Power LED always flashing when backlight is off
Hi Jazzy,

here it works. LED is flashing only on missed calls and new voice messages AND the screen of the phone will go dark on power save mode.

I hope this 3 attachments will help.

           
(This post was last modified: 03-26-2017 12:23 PM by Werner1959.)
03-26-2017 12:22 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
ike Offline
Junior Member
**

Posts: 11
Joined: Jan 2013
Reputation: 0
Post: #76
RE: T46G: Power LED always flashing when backlight is off
(03-24-2017 03:33 AM)Travis Wrote:  Yealink already release a new T46G firmware version to fix this issue, please download from below link and have a test:
Thank you, it works! Smile
03-26-2017 12:44 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Jazzy Offline
Junior Member
**

Posts: 8
Joined: Mar 2017
Reputation: 0
Post: #77
RE: T46G: Power LED always flashing when backlight is off
(03-26-2017 12:22 PM)Werner1959 Wrote:  Hi Jazzy,

here it works. LED is flashing only on missed calls and new voice messages AND the screen of the phone will go dark on power save mode.

I hope this 3 attachments will help.

Thanks Werner1959, I have the settings the same as you and the LCD it still lit, as I say it's very faint, you can't notice it during the day but at night it's more obvious.. I've attached a picture where you can kind of see it lit up..    
(This post was last modified: 03-26-2017 12:53 PM by Jazzy.)
03-26-2017 12:52 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Werner1959 Offline
Member
***

Posts: 70
Joined: Nov 2016
Reputation: 0
Post: #78
RE: T46G: Power LED always flashing when backlight is off
@ Jazzy

Most time I look at the phone during daylight or when in office all the lights are on. In the night I sleep instead of regarding phones Wink Perhaps sometime I should regard the display of the phone in the night and check this out.

I do not really know and I did not tested it, but perhaps setting "Unused BackLight" from "low" to "off" or setting "Active Backlight Level" to a lower level will bring better result for you?
03-26-2017 01:05 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Travis_Yealink Offline
Super Moderator
******

Posts: 171
Joined: Mar 2016
Reputation: 1
Post: #79
RE: T46G: Power LED always flashing when backlight is off
Dear all,

The development of all models were done.
Please download the new firmware x.81.0.71 from below link:
http://ftp.yealink.com/?ShareToken=E6C4D...092C94481D

If anything I can help, pls feel free to let me know.

Regards,
Yealink_Travis
03-28-2017 03:05 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Louis6321 Offline
Junior Member
**

Posts: 10
Joined: Nov 2016
Reputation: 0
Post: #80
RE: T46G: Power LED always flashing when backlight is off
(03-28-2017 03:05 PM)Travis Wrote:  Dear all,

The development of all models were done.
Please download the new firmware x.81.0.71 from below link:
http://ftp.yealink.com/?ShareToken=E6C4D...092C94481D

If anything I can help, pls feel free to let me know.

Regards,
Yealink_Travis

Woooooo. Thanks Travis! Heart

It's working perfectly on T48G with 0 light time and 3000 dark time (I left it as 3000 because that's the default). Smile

Thanks again.
(This post was last modified: 03-28-2017 03:18 PM by Louis6321.)
03-28-2017 03:07 PM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Need bin and rfs files SIP-T46G RobbyK 1 2,191 01-11-2024 11:26 PM
Last Post: complex1
  SIP-T46G Need firmware update instructions RobbyK 2 2,890 01-11-2024 10:52 PM
Last Post: RobbyK
  T46G recovery files evoip 1 2,939 10-10-2023 12:46 AM
Last Post: Yisroel_MongoTEL
  T46G Multiple EXT Port amandah 2 3,082 04-04-2023 01:06 AM
Last Post: Yisroel_MongoTEL
Photo T46G LED blinks when screen is off W 4 9,743 03-29-2023 05:36 AM
Last Post: matthewchubb
Information Toggle Power LED or update config via remote? 48design-cg 0 1,593 01-17-2023 05:32 PM
Last Post: 48design-cg
  T46G/S Multicast on PC Port Issue MiKeDaDoC 5 13,352 01-02-2023 01:30 AM
Last Post: kw160008
  T46G call completed elsewhere zimbocz 3 11,516 10-28-2022 03:28 AM
Last Post: tredd1982
  T46G SSL 2 & 3 Vulnerability russavd 0 1,985 09-24-2022 05:07 AM
Last Post: russavd
  T46G - shortcut to activate/ deactivate accounts? westats 4 7,320 07-07-2022 11:40 AM
Last Post: westats

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication