New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
2 T46G Phones; Different BLF behavior
Author Message
phoneguy797 Offline
Junior Member
**

Posts: 5
Joined: Sep 2013
Reputation: 0
Post: #1
2 T46G Phones; Different BLF behavior
I have 2 T46G phones, where I have BLF DSS buttons defined to monitor the status of other phones on the system.

What I noticed is that one of the T46 phones, on the BLF buttons, show solid GREEN lights when the monitored phones are Idle, and solid RED lights when the monitored phones are InUse. (Which to me is reminiscent of the T38 behavior)

On the other T46 phone, the BLF buttons are 'Off' when the monitored phones are Idle, and are solid RED when the monitored phones are InUse.

I thought it was because the phones were different revision (one was version 71 and the other was version 72). I upgraded both of them (and a T42G also on the same system) to 28.72.0.1, but the behavior remains the same- one with the GREEN Idle lights, and the other with 'Off' Idle status lights. [BTW, the T42G behaves as I expect a T4x phone to behave- that the Idle BLF buttons LED is 'Off', not GREEN]

It doesn't matter to me which way the lights are when Idle, whether they are 'Off' or solid GREEN, I'd just like the 2 same-model phones to behave the same!?! At this point I can't explain the difference to the customer.

The DSS buttons are programmed the same on both phones- BLF, value 221 (to monitor x221 for instance), Account 1

I can't figure out why one would show GREEN and the other would show 'Off'

-phoneguy
06-12-2014 01:15 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
2 T46G Phones; Different BLF behavior - phoneguy797 - 06-12-2014 01:15 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T46G - Disable Line Key Configuration ? timalex 13 15,717 04-12-2019 09:23 AM
Last Post: Johnny88
  T46G Call Fwd DSS Key enables / disables ALL fwd types MintTelecom 4 3,262 02-06-2018 05:28 AM
Last Post: Aishion_Yealink
  t46g: intercom over speaker rather than headset? asinshesq 22 30,649 01-24-2018 10:02 PM
Last Post: mikes
  T46G 28.82.0.2.0 -- BUG Tyler 1 1,706 09-29-2017 05:58 AM
Last Post: Lucia_Yealink
  T46G - Display IP Cam Picture or MJPG Video Stream via DSS Key smartpc 10 10,961 04-14-2017 11:46 AM
Last Post: MohammedTahir
  Does BLF work with analog phones? Filipe06 1 2,563 11-14-2016 08:12 AM
Last Post: Lucia_Yealink
  Yealink phones rebooting perhaps caused by broadcast storm srcurtis 1 3,020 09-19-2016 05:17 PM
Last Post: Karl_Yealink
  T46G - 28.72.0.25+26 wallpaper bug ? timalex 12 20,290 08-28-2016 11:27 PM
Last Post: sfrazier
  T46G LLDP-MED VLAN Issue joebocop 24 39,862 08-03-2016 03:14 AM
Last Post: PavlovsPuppy
  Cannot sign in to Skype for Business T46G WerVermaak2 1 3,088 07-12-2016 02:26 PM
Last Post: WerVermaak2

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication