T46G: Power LED always flashing when backlight is off

[Travis_Yealink]

(10-04-2017 02:24 PM)Werner1959 Wrote:  

(09-30-2017 02:54 PM)WelshPaul Wrote:  Yep same here although I'm using a Yealink T46G! Yealink clearly have no intention of reverting this "feature" back to how it was originally.

This is very strange that your T46G device has still the bug with the new firmware and my device works well after the update Did you (I did so) make a factory reset after update to the new firmware? Perhaps this may help.

---

(10-03-2017 05:25 PM)Jazzy Wrote:  @Travis is it possible to have a copy of the latest version of the firmware this is fixed in please?

Thanks

I think, this should be the (still active) link:
http://ftp.yealink.com/?ShareToken=7E414...04484A3906

This should be the newest "special firmware", as I remember.

Dear all,

in our V82, we do have solution for this problem, hopefully, you could check our release note and our admin guide first.
13. Optimized the feature of Power Saving.
Description: For SIP-T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones, you can
also configure the flashing period for the power indicator LED when the IP phone
enters power-saving mode.
The parameters in the auto provision template are described as follows:
features.power_saving.power_led_flash.on_time =
features.power_saving.power_led_flash.off_time =

Let me know if anything I could help.

Best Regards,
Yealink_Travis