T46G: Power LED always flashing when backlight is off

[Travis_Yealink]

(05-25-2017 05:34 PM)Werner1959 Wrote:  Jazzy, surely I tried out the practice with the "reset to factory settings", in this way:

1. saving the actually configuration
2. downgrade from *.90 to *.71
3. reset to factory Settings
4. upload of the saved configuration

But this did not help, the display is shining bright the whole day and night. With all firmware versions before and after *.71 this does not happen, so there is no Hardware Problem.

So I wait for a solution from Yealink for this issue before the next major update. It is not acceptable that my displays are shining bright for the next half year or longer.

Hi,

Let me give you an explanation about Yealink firmware has two kinds of versions:
The first one is what you see on our official website, in general version, the main purpose is for adding new features, but have some major bugs fixed.
The second one is technical support version, the main purpose is for bug fixing, it's a rolling version.
For example, you meet a issue base on the x.81.0.25, and then we will release a version like x.81.0.26 to fix this bug, for another bug base on the x.81.0.25, we will release a newer version x.81.0.27(.26 version is occupied), .27 version will also include the solution of .26 version.
From my understanding, you can simply treat .27 version better than .26 version better than .25 version.

Please test x.81.0.91 version, which is based on x.81.0.90
http://ftp.yealink.com/?ShareToken=1AAD5...62F9E47124
NOTE: please check the option on Features-->Power LED after upgrading

BTW, .90 and .110 doesn't have much difference, we fixed a bug about RTCP-xr on .110, if you don't use this feature, I believe .91 version is OK for you.

Any question, freely to let me know.

Regards,
Travis