Change vlan setting to more than one phone at once

[cptjack]

First thing is to manually configure one phone to make sure you have the correct settings for your network. Then you can apply these parameters using the example script(s) above, either PHP or SIP Notify to only change the parameters you really need.

Like:

Code:

<item>network.vlan.internet_port_enable = 1</item>
<item>network.vlan.internet_port_vid = 132</item>
<item>network.vlan.internet_port_priority = 0</item>
<item>network.vlan.pc_port_enable = 1</item>
<item>network.vlan.pc_port_vid = 1</item>
<item>network.vlan.pc_port_priority = 0</item>

or any combination thereof. This is only an example, so it should be changed to match your network configuration.

Once you have it setup on one phone, it should be possible to duplicate the settings accross multiple phones. The parameters are the same as the auto provisioning guide, but they can be included in an XML message/script to change it on the phone.

I would opt to add a command to the sip_notify.conf so you can update the phone from the Asterisk CLI. Since the phone will reboot, you can monitor the if the extensions goes offline and come back online with the new IP from within the console.