T42G VLAN settings for PC VLAN

[jolouis]

(08-31-2017 08:43 AM)Uwe Wrote:  How can I make this work with the T42G? The T42G should get an IP address from thge VLAN 41 and the PC should get an IP address from VLAN 31.

Configure the switch port so that:
a) VLAN 41 is allowed as tagged
b) Untagged/default VLAN for the port is 31.

Then configure the T42G under advanced network settings to have VLAN ID of 41. Make sure Span to PC is disabled.

That should do it. When you power on the phone, all traffic from it will try to communicate on VLAN 41. When you plug any device into the PC port on the back of the phone, it will be passed to the switch untagged, and the switch will assign it/treat it as part of VLAN 31.