T46G: Power LED always flashing when backlight is off

[Travis_Yealink]

(03-22-2017 11:58 AM)celito Wrote:  I know there are providers out there much (MUCH) larger than us, but reading through the thread I'm seeing a lot of people who have a fairly low count of phones. Maybe my post will make a difference to Yealink. These bugs are an issue for us as well and we have over 2000 Yealink T4x phones in the field. We really need a fix. This is turning in to a very dark mark on Yealink's record which is unfortunate because I have pushed hard to get our team to use the T4x series exclusively.

Dear all,

Really sorry for the inconvenience brought to you.

Yealink already release a new T46G firmware version to fix this issue, please download from below link and have a test:
http://ftp.yealink.com/?ShareToken=DA2D3...C83D905A03
Please find attached photo.

For example:
If you set as above, the power saving LED light will be turn off, and if you set 100 on these two options both, the light will light for 100ms and dark for 100ms, is it clear for you?

For other models, we will release new firmware within next 2 weeks, we will also put this modification into our next general firmware release.
Any misunderstand, freely to let me know.

Regards,
Travis