T46G: Power LED always flashing when backlight is off

[Nasevorn]

(02-16-2017 05:51 PM)MHedish Wrote:  I opened a ticket for the issue (#41052) and got back the same nonsense that this is a designed behavior:

---- 8< ----
Thanks for your information. The issue you mentioned is not bug, we design it by default.
If you don't need power saving feature, you can go to web interface of the phone, and disable power saving feature.
I will also double check with product manager to check if we will develop new feature for the flashing issue.
I will keep you update.
BR
Kevin
---- 8< ----

Well, as we all know having the LED showing the same status as a missed call simply because the backlight is off is a major annoyance.

This needs to be fixed. Previous firmware versions did NOT behave this way.

Everyone here should open a bug report. The more tickets we have, the more likely they are to address it. Don't just write "me too" here in the forums, file a real bug report.

Hi MHedish

I opened a new ticket today and Travis got the picture:
----------------------------------------------------------
Travis_Yealink Reply Feb 20, 2017 20:30:16 +0800

Dear Michael,
Thanks for your comment.
I will forward to our engineer, and get back to you once we release the new firmware.

Regards,
Travis

Nasevorn Reply Feb 20, 2017 20:15:52 +0800

Dear Travis
Thank you very much for the very fast response.

Concerning your question: «... Our engineer plans to add a switch to enable/disable this blink, but how do you think we add another option to change the frequency, so that you can set the blinking interval yourself(to feel more comfortable)? ...». I suggest, that frequency for «phone ist alive» could be one blink every five seconds, frequency for missed calls a double blink every two seconds. Hope that helps.

Greetings

Michael

Ticket
Travis_Yealink Reply Feb 20, 2017 19:58:19 +0800

Hello Michael,
This is Travis from Yealink Technical Support Team, my pleasure to work with you!

For this behavior, it's designed on x.80.0.130 verision or later.(when power saving feature is on, the LED blink informs customer, the phone is still working)
We will implement a solution soon, meanwhile, to provide the best solution, would you please answer my simple question below? And then I will forward to our engineer.
Our engineer plans to add a switch to enable/disable this blink, but how do you think we add another option to change the frequency, so that you can set the blinking interval yourself(to feel more comfortable)?

Wait for your comment.

regards,
Travis
----------------------------------------------------------