[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46G Questions
Author Message
Boolah Offline
Junior Member
**

Posts: 28
Joined: Jul 2013
Reputation: 1
Post: #1
T46G Questions
I have a few questions/suggestions for the T46G:

1) Is there a way to specify or change the session timeout for the web interface?

2) Would you consider adding the ability to justify the date/time along the top bar? For example, allow moving the date to the left and the time to the right, or having the date and time justified to the left or right. Also, can the date/time still be displayed while on a call?

3) Is it possible to add a reboot option to the LCD screen that doesn't require admin permissions? Perhaps this is something that could be enabled/disabled.

4) If your bluetooth headset is turned off and a call is made/received from the handset or speakerphone, but during the call you turn the bluetooth headset on, it doesn't appear as though can call can be transferred to the bluetooth headset. Is it possible to do this, and if so, how?
(This post was last modified: 08-06-2013 11:02 PM by Boolah.)
08-02-2013 02:58 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 716
Joined: May 2013
Reputation: 7
Post: #2
RE: T46G Qustions
I have a few questions/suggestions for the T46G:

3) Don't you hold down "X" or "OK" and is asks to reboot?
1 is reboot, the other is factory reset. neither requires a password.
08-02-2013 06:45 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Boolah Offline
Junior Member
**

Posts: 28
Joined: Jul 2013
Reputation: 1
Post: #3
RE: T46G Qustions
Didn't realize you could reboot the phone that way - thanks!
08-02-2013 08:49 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 716
Joined: May 2013
Reputation: 7
Post: #4
RE: T46G Qustions
I don't remember seeing it in the manual... but I used that method on the T38's and tried it on the 46's. But its not in the 38 manual either that I recall. A hidden feature Smile
08-02-2013 11:46 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,684
Joined: Dec 2012
Reputation: 24
Post: #5
RE: T46G Qustions
(08-02-2013 02:58 AM)Boolah Wrote:  I have a few questions/suggestions for the T46G:

1) Is there a way to specify or change the session timeout for the web interface?

2) Would you consider adding the ability to justify the date/time along the top bar? For example, allow moving the date to the left and the time to the right, or having the date and time justified to the left or right. Also, can the date/time still be displayed while on a call?

3) Is it possible to add a reboot option to the LCD screen that doesn't require admin permissions? Perhaps this is something that could be enabled/disabled.

4) If your bluetooth headset is turned off and a call is made/received from the handset or speakerphone, but during the call you turn the bluetooth headset on, it doesn't appear as though can call can be transferred to the bluetooth headset. Is it possible to do this, and if so, how?

Hi Boolah,
1) You can access to the phone webpage-Features-General Information, and set "Auto-Logout Time(1~1000min) " as you want.
2) Sorry currently we don't support this. But it's a good idea, we will consider it.
4) Currently you should turn on it through LCD in advanced, so the phone can in bluetooth mode. During the call, you are not able to turn on it.
Thanks.
08-05-2013 11:21 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Boolah Offline
Junior Member
**

Posts: 28
Joined: Jul 2013
Reputation: 1
Post: #6
RE: T46G Qustions
(08-05-2013 11:21 AM)Yealink Support Wrote:  1) You can access to the phone webpage-Features-General Information, and set "Auto-Logout Time(1~1000min) " as you want.

Is there any to provision this? I don't see this feature listed in the provisioning docs.

(08-05-2013 11:21 AM)Yealink Support Wrote:  4) Currently you should turn on it through LCD in advanced, so the phone can in bluetooth mode. During the call, you are not able to turn on it.

I'm not sure I explained this correctly. The bluetooth capability in the phone is already turned on. The bluetooth headset is already paired to the phone. The issue is if the bluetooth headset is turned off (but bluetooth in the phone is still turned on), and you make/receive a call and decide you want to use your headset half way through the call, you cannot simply turn on your headset and transfer the call to it. You first have to hang up the call and then the headset will automatically connect to the phone after the call is hung up.
08-06-2013 02:30 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,684
Joined: Dec 2012
Reputation: 24
Post: #7
RE: T46G Qustions
Hi Boolah,
1. Auto provisioning parameter is below:
-----------------------------------------
#Configure the overtime (in minutes) of logging web user interface. It ranges from 1 to 1000, the default value is 5.
features.relog_offtime =
-----------------------------------------

2. Thanks for your explaination, sorry currently we don't support this, it requires the phone to switch the channel during the call.
Do you know is there any other brand phone can support this?
08-06-2013 10:48 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Boolah Offline
Junior Member
**

Posts: 28
Joined: Jul 2013
Reputation: 1
Post: #8
RE: T46G Qustions
(08-06-2013 10:48 AM)Yealink Support Wrote:  2. Thanks for your explaination, sorry currently we don't support this, it requires the phone to switch the channel during the call.
Do you know is there any other brand phone can support this?

Yes, the Grandstream GXP2200 can do this. In fact, the call is transferred to a paired headset automatically, without any user intervention, when the headset is turned on in the middle of a call.
08-06-2013 03:00 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Feature Request T46G - Return to page 1 imfloridaguy 4 7,084 08-30-2021 12:34 AM
Last Post: eric@hudsonvalleygeek.com
  T46G with EXP40 Sidecars Programming Burl 0 1,358 05-27-2021 11:35 PM
Last Post: Burl
  T46G/T48G no Ringtone because of 183 insted of ringing eurix 2 2,523 04-09-2021 05:16 PM
Last Post: eurix
Heart T46G/T46S - Permission Denied! andy.hughes@intelligencehs.co.uk 1 2,956 03-19-2021 08:59 PM
Last Post: Yisroel_MongoTEL
  yealink t46g Ssl VPN sarajennifer 0 1,601 03-11-2021 02:41 PM
Last Post: sarajennifer
  Call-Info sip header for T46G sidjf3zhdu 9 19,549 02-22-2021 04:06 PM
Last Post: jiansong
  yealink T46g cannot disable lcd screensaver mike702 2 2,755 02-10-2021 04:33 AM
Last Post: jamesbchz
Bug Yealink T46G wont turn on after firmware update mike702 1 2,579 02-02-2021 08:21 PM
Last Post: complex1
  Line Key6-10 Greyd Out - T46G redmondsau 0 1,664 10-02-2020 07:38 AM
Last Post: redmondsau
  UH36 Support in T46G jinto.antony 1 2,984 10-01-2020 04:58 PM
Last Post: Yisroel_MongoTEL

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication