[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Thread Closed 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
First Notify direct second only after 30-40 seconds?
Author Message
wecloudit Offline
Junior Member
**

Posts: 5
Joined: Feb 2019
Reputation: 0
Post: #1
First Notify direct second only after 30-40 seconds?
Hello,
We send messages via SIP notify to the yealink phones.
If we send a message at second 1 it is directly processed.

A second NOTIFY request send at f.e. 10 seconds to the same phone is not processed (no action is taken).

The request is only performed on the phone when we send another request after 30-40 seconds.

This is not nice, if we turn a light on and directly off, it will stay on since the second NOTIFY is "lost".

What could be wrong? Is the amount of NOTIFIES limited per second/minute?

We would like to be able to send notifies that are directly processed like blinking lights etc...

Thanks for the answers!
(This post was last modified: 06-09-2021 05:26 PM by wecloudit.)
06-09-2021 02:21 AM
Find all posts by this user    like0    dislike0
wecloudit Offline
Junior Member
**

Posts: 5
Joined: Feb 2019
Reputation: 0
Post: #2
RE: First Notify direct second only after 30-40 seconds?
Problem solved: the branch and callid need to be different between each requests. If they are the same with every request the phone times out till 30 seconds...
(This post was last modified: 06-15-2021 08:16 PM by wecloudit.)
06-15-2021 08:14 PM
Find all posts by this user    like0    dislike0
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,243
Joined: Jan 2014
Reputation: 36
Post: #3
RE: First Notify direct second only after 30-40 seconds?
(06-15-2021 08:14 PM)wecloudit Wrote:  Problem solved: the branch and callid need to be different between each requests. If they are the same with every request the phone times out till 30 seconds...

Hi,

Glad you have sorted out the issue.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
06-15-2021 08:51 PM
Find all posts by this user    like0    dislike0
Thread Closed 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Best practices to notify unconditional call forwarding with Asterisk oliv 1 3,253 08-16-2019 10:07 PM
Last Post: jolouis
  Direct to voicemail transfer with BLF in asterisk - T46G nicknomo 25 81,871 02-02-2019 09:08 AM
Last Post: alexgonzalez
  SIP Notify Answer event on T4 range DMC_Support 2 4,995 08-10-2017 05:43 AM
Last Post: DMC_Support
  SIP Notify Answer event on T41 DMC_Support 0 3,425 08-03-2017 04:32 PM
Last Post: DMC_Support
  T46G display blinks after Backlight Time(seconds) timeout wills 1 4,768 04-27-2016 07:14 PM
Last Post: Karl_Yealink
Question First seconds no sound JSM Communications 2 4,995 02-24-2016 05:34 AM
Last Post: RUN_Support
  Direct Pickup can't be disabled nsimpson 1 5,157 01-05-2016 05:18 AM
Last Post: Karl_Yealink
  Provisioning Issue auto_provision.power_on = 1 required for Sip Notify Frank Drews 3 7,916 07-17-2015 11:12 PM
Last Post: Frank Drews
  T48G BLF without direct call pickup SnakeBiteWilly 2 6,854 04-22-2015 07:38 AM
Last Post: SnakeBiteWilly
  How to send sip xml notify to the device raymondtang 1 6,046 04-18-2015 06:29 AM
Last Post: Flora_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication