+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: First Notify direct second only after 30-40 seconds? (/showthread.php?tid=45178)
First Notify direct second only after 30-40 seconds? - wecloudit - 06-09-2021 02:21 AM
Hello,
We send messages via SIP notify to the yealink phones.
If we send a message at second 1 it is directly processed.
A second NOTIFY request send at f.e. 10 seconds to the same phone is not processed (no action is taken).
The request is only performed on the phone when we send another request after 30-40 seconds.
This is not nice, if we turn a light on and directly off, it will stay on since the second NOTIFY is "lost".
What could be wrong? Is the amount of NOTIFIES limited per second/minute?
We would like to be able to send notifies that are directly processed like blinking lights etc...
Thanks for the answers!
RE: First Notify direct second only after 30-40 seconds? - wecloudit - 06-15-2021 08:14 PM
Problem solved: the branch and callid need to be different between each requests. If they are the same with every request the phone times out till 30 seconds...
RE: First Notify direct second only after 30-40 seconds? - complex1 - 06-15-2021 08:51 PM
(06-15-2021 08:14 PM)wecloudit Wrote: Problem solved: the branch and callid need to be different between each requests. If they are the same with every request the phone times out till 30 seconds...
Hi,
Glad you have sorted out the issue.