Log in

mikelharris · 06-18-2015 01:30 AM

Hi,
I´m trying to register a SIP extension (t20 phone) to a call server (Mitel Mx-One). Looking at traces i can see that phone always try to register at 5062 port (It should be 5060 as i have configured in account settings).
FW version: 9.73.0.50
IP Phone Address: 172.22.16.101
Call server: 172.22.16.101
Account configured is account1. Account2 is disabled.
Any idea?
Thanks.

***James_Yealink*** · 06-18-2015 04:18 AM

Hi Mike,

5060 is reserved as a direct ip call port in Yealink phones and it will always use a source port from 5062.

But the destination port phone register to is 5060. From the second pic you attach there is parameter Dst port:5060. The Dst ip address is 172.22.17.5 which I think it's your pbx server.
It seems like that 5060 port in your pbx server is not reachable.

Regards,
James

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	T26P failed to register with TLS transport	tvt	0	3,526	10-29-2021 02:58 PM Last Post: tvt
	T21P Register Failed	agatospk	6	18,140	01-31-2020 06:08 AM Last Post: agatospk
	T28P - Firmware 2.73 - no PC port	toxicfusion	3	11,669	02-03-2016 10:03 AM Last Post: toxicfusion
	T21P E2 can't register(stuck at Registering ..)	myombo	1	8,340	11-05-2015 05:25 AM Last Post: Yealink_Michael
	Failover and register on enable config	jmpg	3	10,257	10-27-2015 08:55 PM Last Post: jmpg
	T22P Custom UDP SIP Port	david_heck	5	13,216	10-07-2015 01:25 AM Last Post: Abigail
	T20P Register Fail on Reboot	amirscei	2	8,939	08-06-2015 07:07 AM Last Post: amirscei
	Register Failed on T22P to MyPBX U100	Firewall	3	11,713	07-14-2015 11:36 AM Last Post: Firewall
	T26P: Does not register at the asterisk server on 5060 port but on 5062, 5063 etc.	dimangelid	6	32,131	06-09-2015 05:04 PM Last Post: carlo.passet
	T21p / T19p - registration fail - helps changing local SIP port	kakaki	3	19,669	01-06-2015 06:24 AM Last Post: CWR

Threaded Mode \| Linear Mode T20 try to register on 5062 port
Author	Message