Yealink Forums
T20 try to register on 5062 port - Printable Version

+- Yealink Forums (
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+---- Forum: T2xP Series (/forumdisplay.php?fid=21)
+---- Thread: T20 try to register on 5062 port (/showthread.php?tid=3965)

T20 try to register on 5062 port - mikelharris - 06-18-2015 01:30 AM

I´m trying to register a SIP extension (t20 phone) to a call server (Mitel Mx-One). Looking at traces i can see that phone always try to register at 5062 port (It should be 5060 as i have configured in account settings).
FW version:
IP Phone Address:
Call server:
Account configured is account1. Account2 is disabled.
Any idea?

RE: T20 try to register on 5062 port - James_Yealink - 06-18-2015 04:18 AM

Hi Mike,

5060 is reserved as a direct ip call port in Yealink phones and it will always use a source port from 5062.

But the destination port phone register to is 5060. From the second pic you attach there is parameter Dst port:5060. The Dst ip address is which I think it's your pbx server.
It seems like that 5060 port in your pbx server is not reachable.