New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
BLF feature - T29G v.46.80.0.95 wont work
Author Message
Bee Offline
Junior Member
**

Posts: 1
Joined: Mar 2016
Reputation: 0
Post: #1
BLF feature - T29G v.46.80.0.95 wont work
Hi,

We have T29G with
Firmware Version 46.80.0.95
Hardware Version 46.0.0.128.0.0.0

The BLF Feature does not work.

I already read this http://support.yealink.com/faq/faqInfo?id=264 and http://forum.yealink.com/forum/showthrea...e=threaded but it still not working.

We tested Blf in T22P model and it works. But in T29G. it wont
(This post was last modified: 03-03-2016 12:42 AM by Bee.)
03-03-2016 12:29 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Michael Offline
Administrator
*******

Posts: 382
Joined: Jul 2015
Reputation: 1
Post: #2
RE: BLF feature - T29G v.46.80.0.95 wont work
hi

thanks for your information

for this issue, please check below :

1. is the BLF setting correct ? value and label and line value are all correct ?
2. BLF not working means the BLF light will not light up or the status of the light will not change when phone is in a different status ? please describe the issue scenario more clear to us so that we can provide better support !

at last , please provide us the trace file for future analysis,trace file including pcap file, config bin and syslog file , we need pcap file to check the communication of phone and server side , we need syslog file to know what happened to phone side , and we need config file to check if any configuration is missed, so we need three of them provide at one time.

for how to get them , please refer to the FAQ below:
http://forum.yealink.com/forum/showthread.php?tid=1319

we can do nothing without any trace file you provide !

let me know if any question

TKS & BR

Michael
03-03-2016 06:01 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
oliv Offline
Junior Member
**

Posts: 37
Joined: Feb 2016
Reputation: 0
Post: #3
RE: BLF feature - T29G v.46.80.0.95 wont work
(03-03-2016 12:29 AM)Bee Wrote:  Hi,

We have T29G with
Firmware Version 46.80.0.95
Hardware Version 46.0.0.128.0.0.0

The BLF Feature does not work.

I already read this http://support.yealink.com/faq/faqInfo?id=264 and http://forum.yealink.com/forum/showthrea...e=threaded but it still not working.

We tested Blf in T22P model and it works. But in T29G. it wont

Do you have any value set in pickup field ? (such as:
expansion_module.1.key.33.pickup_value = *8)

Removing it from a non-working BLF key on a T27P of mine, made it work at once.
03-30-2016 07:00 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Pcap Feature no longer works on 44.80.0.95 for T23G avayax 1 1,804 04-27-2016 05:34 PM
Last Post: Yealink_Karl
  T28P V73 Firmware - BLF Lights no longer work ndurain 5 4,850 06-02-2015 05:00 AM
Last Post: rkellogg
  Feature Sync on v73 Beta kwmo 2 2,286 10-17-2014 05:43 AM
Last Post: kwmo

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication