Yealink T21P E2 fails to redial missed calls from history

[wirelessmundi]

When redialing those missing calls, the phone tries to authenticate with <username>@<ip> instead of <username>@<domain>, with <ip> being the ip address where the missed call came from.

It seems specific to this model (Yealink T21P E2 52.80.0.70), as redial works perfectly with all other models we could test (T20P, T21P, T26P, T28P) with similar default configuration.

Already tried suggestions from other threads to change account.X.cp_source (where X=1 in my case) to all possible values (0, 1 or 2) without any success.

Any other suggestions?

[Karl_Yealink]

Hi,

Please try the syntax: features.redial_via_local_sip_server.enable=1

[cabijuan]

I have the same problem in a Yealink T21 E2, I'm going crazy

---

Yes, it works thanks.

[wirelessmundi]

Yealink_Karl, what you suggested seems to work perfectly!!!!

features.redial_via_local_sip_server.enable=1

Thanks a lot... Will this be the default in the next firmware like in other models?

[Karl_Yealink]

(01-09-2016 01:50 AM)wirelessmundi Wrote:  Yealink_Karl, what you suggested seems to work perfectly!!!!

features.redial_via_local_sip_server.enable=1

Thanks a lot... Will this be the default in the next firmware like in other models?

If other models have the same issue, you can try the syntax to solve it.

[lruiz@connexum.com]

This is happening on other models as well. is there a way to set this via web interface?