[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Increase intercom tone value
Author Message
support@thearcehouse.com Offline
Junior Member
**

Posts: 8
Joined: Apr 2014
Reputation: 0
Post: #1
Information Increase intercom tone value
Hello,

I have a customer that is complaining about the intercom tone. Apparently the volume for the intercom alert tone is very low. Comparing to other phones, it's also very low.

All the phones are Yealink T46S with firmware 28.0.81.110. The volume is at the max. in the speaker phone and handset.

Any suggestions?

Sebastian
10-05-2017 03:52 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
joshua@itstel.com Offline
Junior Member
**

Posts: 41
Joined: Jul 2014
Reputation: 0
Post: #2
RE: Increase intercom tone value
The best I found is to go under Settings, then Tones. Select Custom for the Country, then for Auto Answer, enter 1900 for the frequency. It's a little more piercing beep. There is no way to make it longer or louder. You can only change the frequency.
10-13-2017 12:17 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
joshua@itstel.com Offline
Junior Member
**

Posts: 41
Joined: Jul 2014
Reputation: 0
Post: #3
RE: Increase intercom tone value
Yealink needs to increase the length of the tone, not so much the volume (though volume would help as well). The problem is when using intercom, we need about 1-2 seconds of the tone instead of a few milliseconds before the phone auto answers.
10-13-2017 11:25 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Elaine_Yealink Offline
Super Moderator
******

Posts: 152
Joined: Aug 2014
Reputation: 4
Post: #4
RE: Increase intercom tone value
This request has been delivered to our product department. Will post here the final decision when we have feedback from PD.
Thanks so much for your kind suggestion.

Regards
Elaine
10-16-2017 09:08 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Elaine_Yealink Offline
Super Moderator
******

Posts: 152
Joined: Aug 2014
Reputation: 4
Post: #5
RE: Increase intercom tone value
Hi there,

The suggestion has been accepted by our Product Department and will be implemented in a future version. The estimate time will be 2018.

Please pay attention to our website for more information in 2018.

Regards
Elaine
10-17-2017 06:28 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
4iptech Offline
Junior Member
**

Posts: 1
Joined: Nov 2017
Reputation: 0
Post: #6
RE: Increase intercom tone value
This cannot come quick enough, my users dont want to blast their neighbors at full volume just so they can catch when someone intercom beeps.
02-22-2018 10:44 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
llbcjosh Offline
Junior Member
**

Posts: 3
Joined: May 2017
Reputation: 0
Post: #7
Exclamation RE: Increase intercom tone value
Do we have an estimated date yet!? It's mid 2018 now and there have been several firmware updates, but this has yet to be implemented. HuhAngry
05-28-2018 06:14 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
MattL Offline
Junior Member
**

Posts: 2
Joined: Mar 2018
Reputation: 0
Post: #8
RE: Increase intercom tone value
(05-28-2018 06:14 PM)llbcjosh Wrote:  Do we have an estimated date yet!? It's mid 2018 now and there have been several firmware updates, but this has yet to be implemented. HuhAngry

We're also waiting for this feature, an ETA would be great since we have several clients who have asked for this.
06-01-2018 02:15 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Final Source_Support Offline
Junior Member
**

Posts: 4
Joined: Sep 2017
Reputation: 1
Post: #9
RE: Increase intercom tone value
This apparently minor issue is a DEAL BREAKER for MOST end users.

They can only hear "we're working on it" so many times before they find another vendor.

You have been made aware of this issue as early as 2015 and there has still been no reasonable response.

We will not sell another Yealink phone until this is resolved.
07-05-2018 08:05 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
elementpbx Offline
Member
***

Posts: 110
Joined: Dec 2012
Reputation: 1
Post: #10
RE: Increase intercom tone value
I just installed quantity of 100 - T46S yesterday and they just told us to rip them out because the owner is slightly hearing impaired and cannot hear the low fast Intercom beep. How hard is it for Yealink Engineers to implement this????? This is common sense. They have every other tone increase except this.
08-10-2018 04:42 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  repeating ring tone - how? wuesten_fuchs 2 797 09-26-2024 05:30 PM
Last Post: wuesten_fuchs
  T4X no beep on intercom answer jcaruso 2 8,499 04-12-2022 04:46 AM
Last Post: JohnJ
Wink Intercom and BLF eric@salemcomputer.com 4 11,143 11-04-2020 12:39 AM
Last Post: remingtonsmith
  Intercom tone - make louder? imfloridaguy 7 20,594 09-22-2020 06:54 PM
Last Post: Nraphan
  Increase BLF Label Field T42G redmondsau 0 4,143 09-08-2020 11:12 PM
Last Post: redmondsau
  Ring Mute while keeping intercom ring on Problemchild 1 9,652 05-09-2018 09:00 AM
Last Post: Kevin_Yealink
  T46G Firmware 28.80.0.60 disables the intercom auto-answer function KenDoerksen 11 38,378 07-28-2017 06:05 AM
Last Post: Lucia_Yealink
  T48G Intercom Auto-answer cm21 14 42,989 03-06-2017 08:48 PM
Last Post: engine411
  Anyone have sucecss using the Intercom with Vonage? saul 4 14,869 02-28-2017 01:36 PM
Last Post: saul
  T46G Call Waiting Tone increase volume fcbayern 0 6,238 02-23-2017 03:42 PM
Last Post: fcbayern

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication