+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: Increase intercom tone value (/showthread.php?tid=41189)
Pages: 1 2
Increase intercom tone value - support@thearcehouse.com - 10-05-2017 03:52 PM
Hello,
I have a customer that is complaining about the intercom tone. Apparently the volume for the intercom alert tone is very low. Comparing to other phones, it's also very low.
All the phones are Yealink T46S with firmware 28.0.81.110. The volume is at the max. in the speaker phone and handset.
Any suggestions?
Sebastian
RE: Increase intercom tone value - joshua@itstel.com - 10-13-2017 12:17 AM
The best I found is to go under Settings, then Tones. Select Custom for the Country, then for Auto Answer, enter 1900 for the frequency. It's a little more piercing beep. There is no way to make it longer or louder. You can only change the frequency.
RE: Increase intercom tone value - joshua@itstel.com - 10-13-2017 11:25 AM
Yealink needs to increase the length of the tone, not so much the volume (though volume would help as well). The problem is when using intercom, we need about 1-2 seconds of the tone instead of a few milliseconds before the phone auto answers.
RE: Increase intercom tone value - Elaine_Yealink - 10-16-2017 09:08 AM
This request has been delivered to our product department. Will post here the final decision when we have feedback from PD.
Thanks so much for your kind suggestion.
Regards
Elaine
RE: Increase intercom tone value - Elaine_Yealink - 10-17-2017 06:28 AM
Hi there,
The suggestion has been accepted by our Product Department and will be implemented in a future version. The estimate time will be 2018.
Please pay attention to our website for more information in 2018.
Regards
Elaine
RE: Increase intercom tone value - 4iptech - 02-22-2018 10:44 PM
This cannot come quick enough, my users dont want to blast their neighbors at full volume just so they can catch when someone intercom beeps.
RE: Increase intercom tone value - llbcjosh - 05-28-2018 06:14 PM
Do we have an estimated date yet!? It's mid 2018 now and there have been several firmware updates, but this has yet to be implemented.
RE: Increase intercom tone value - MattL - 06-01-2018 02:15 PM
(05-28-2018 06:14 PM)llbcjosh Wrote: Do we have an estimated date yet!? It's mid 2018 now and there have been several firmware updates, but this has yet to be implemented.
We're also waiting for this feature, an ETA would be great since we have several clients who have asked for this.
RE: Increase intercom tone value - Final Source_Support - 07-05-2018 08:05 PM
This apparently minor issue is a DEAL BREAKER for MOST end users.
They can only hear "we're working on it" so many times before they find another vendor.
You have been made aware of this issue as early as 2015 and there has still been no reasonable response.
We will not sell another Yealink phone until this is resolved.
RE: Increase intercom tone value - elementpbx - 08-10-2018 04:42 PM
I just installed quantity of 100 - T46S yesterday and they just told us to rip them out because the owner is slightly hearing impaired and cannot hear the low fast Intercom beep. How hard is it for Yealink Engineers to implement this????? This is common sense. They have every other tone increase except this.