Log in

p2xt · 10-22-2015 05:45 PM

Hi,

I have a T46P connected to a EXP40. The BLF configured on EXP40 do not display the status (the led buttons are off) for the first 12 buttons only. This looks like an obvious bug.

This only happens using the latest firmware (28.80.0.70). With firmware version 28.73.0.50 everything seems to work correctly.

***James_Yealink*** · 10-22-2015 06:13 PM

Hello, what's your PBX server? If you reset phone and re-configure the BLF can it work?

p2xt · 10-22-2015 07:22 PM

(10-22-2015 06:13 PM)Yealink_James Wrote: Hello, what's your PBX server? If you reset phone and re-configure the BLF can it work?

Hi James,

It's a asterisk 13 freepbx 12 using chan_sip. I have tried a factory reset on the phone, i have also tried a different t46 or a different exp module. The only way it will display correctly is if i downgrade to the previous version.

Thanks

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	T46G with exp40	Paulo Batista	2	9,925	11-06-2016 01:57 AM Last Post: CWR
	T48G + EXP40 - Cant configure EXP40 using XML Objects	JohnM72	1	8,644	10-14-2016 07:11 PM Last Post: Kevin_Yealink
	EXP40 T46G 28.80.0.70	garabedy	1	6,413	12-23-2015 05:49 AM Last Post: Karl_Yealink
	config T46G with EXP40 - W52P	Paulo Batista	1	8,679	03-09-2015 10:32 AM Last Post: James_Yealink
	EXP40 Module	Mark Hunt	2	9,450	10-14-2014 06:11 PM Last Post: Mark Hunt
	EXP40 Provisioned as a Stand Alone Device?	printwest	3	12,416	01-16-2014 09:07 AM Last Post: Yealink Support

Threaded Mode \| Linear Mode bug on 28.80.0.70 for EXP40
Author	Message