Yealink Forums
bug on 28.80.0.70 for EXP40 - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: bug on 28.80.0.70 for EXP40 (/showthread.php?tid=10978)



bug on 28.80.0.70 for EXP40 - p2xt - 10-22-2015 05:45 PM

Hi,

I have a T46P connected to a EXP40. The BLF configured on EXP40 do not display the status (the led buttons are off) for the first 12 buttons only. This looks like an obvious bug.

This only happens using the latest firmware (28.80.0.70). With firmware version 28.73.0.50 everything seems to work correctly.


RE: bug on 28.80.0.70 for EXP40 - James_Yealink - 10-22-2015 06:13 PM

Hello, what's your PBX server? If you reset phone and re-configure the BLF can it work?


RE: bug on 28.80.0.70 for EXP40 - p2xt - 10-22-2015 07:22 PM

(10-22-2015 06:13 PM)Yealink_James Wrote:  Hello, what's your PBX server? If you reset phone and re-configure the BLF can it work?

Hi James,

It's a asterisk 13 freepbx 12 using chan_sip. I have tried a factory reset on the phone, i have also tried a different t46 or a different exp module. The only way it will display correctly is if i downgrade to the previous version.

Thanks