Yealink T28p no longer working after CudaTel firmware update

[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020

Thread Rating:

0 Votes - 0 Average
1
2
3
4
5

Threaded Mode \| Linear Mode Yealink T28p no longer working after CudaTel firmware update
Author	Message

James_Yealink Offline

Administrator

Posts: 1,159

Joined: Aug 2014

Reputation: 8

Post: #2

RE: Yealink T28p no longer working after CudaTel firmware update

Hi,

In V60 frimware the LLDP feature is disabled as default but in new firmware it's enabled. The "obtaining IP address" issue may be cause by this change.

Have you configured a vlan setting in your network? If yes, please set a correct lldp-med VID in your switch. If not, you may have to disable the LLDP in phone or switch.The LLDP feature has to be disabled in web interface in V72.

About the second issue, can you try manually registering the account and check again? I think no forward option set in phone?
A pcap trace is needed to analyze the issue. Go to setting-> configuration, enable the pcap trace, make a call, then stop the pcap trace, export it. This issue seems more like a server issue. Need to confirm through pcap trace.

Regards,
James

01-20-2015 08:52 PM

« Next Oldest | Next Newest »

Messages In This Thread

Yealink T28p no longer working after CudaTel firmware update - AshElsayid - 01-20-2015, 03:00 AM

RE: Yealink T28p no longer working after CudaTel firmware update - James_Yealink - 01-20-2015 08:52 PM

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	Yealink T48S URL Line Key	jogi29	1	191	06-10-2024 08:12 PM Last Post: jogi29
	Release phone from Zoom to upgrade firmware	jamesmknox	0	250	05-13-2024 02:41 AM Last Post: jamesmknox
	T58 Handset dead / after update no service	dmaack	1	1,049	01-24-2024 12:04 AM Last Post: complex1
	Yealink T28 setup audible ring on 2nd incoming call	JeffWilkinson	20	89,274	10-18-2023 12:59 PM Last Post: sles
	keypad sequence for Forward & DND with Yealink W70B Base	kargah	0	1,553	04-18-2023 10:07 PM Last Post: kargah
	Yealink T27P -Incoming call issue	rsarceno	0	1,469	01-25-2023 08:54 AM Last Post: rsarceno
	T31G Firmware Resetting Cycling	medusanyc	1	2,598	09-24-2022 10:26 PM Last Post: complex1
	Yealink T19 can not automatically hangup inbound calls	giaopc94	0	1,916	08-01-2022 09:28 AM Last Post: giaopc94
	3CX / Yealink passthrough VLAN issue (when phone is rebooted)	maindriver	4	12,311	03-24-2022 10:25 PM Last Post: maindriver
	No IP address for W60 but T42 working ok	heathb	2	4,393	03-09-2022 05:11 PM Last Post: complex1

Forum Jump:

User(s) browsing this thread:

Log in