[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
W52P 2 handsets
Author Message
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,503
Joined: Jan 2014
Reputation: 43
Post: #2
RE: W52P 2 handsets
(06-01-2021 06:40 PM)DAZZLING Wrote:  Hi
we were recently provided with the w52p phone system with 2 handset and a base . Both handsets have been registered with the base and the phone system has been setup by our broadband supplier Bonline. So the problem is the 2nd handset will not allow calls out, although the handset can receive calls . When i contacted Bonline they said that we will require a second base unit as we only have 1 line??? Is this correct if so why supply 2 handsets with 1 base?

Hi,

After the handset is registered to the base station, you can assign one or more outgoing lines or incoming lines for the handset.

The handset can only use the assigned outgoing line(s) to place calls. When multiple outgoing lines are assigned to the handset, the handset uses the first line as the default outgoing line. You can change the default outgoing line of the handset.

The handset can only receive incoming calls of the assigned incoming line(s). You can assign incoming lines to all handsets that registered to the same base station on your handset.

To assign the incoming line of the handset via web user interface:
1. Click on Account -> Number Assignment.
2. To assign incoming lines, to check the desired account from Line No.&Name field to the corresponding handset in the Handset No. field.

To assign the outgoing line of the handset via web user interface:
1. Click on Account -> Number Assignment.
2. To assign outgoing lines, to check the desired account from Line No.&Name field to the corresponding handset in the Handset No. field.
3. Select the desired default outgoing line number from the pull-down list of corresponding Default.

Hope this will help.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
06-01-2021 09:55 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
W52P 2 handsets - DAZZLING - 06-01-2021, 06:40 PM
RE: W52P 2 handsets - complex1 - 06-01-2021 09:55 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  W52P not working after change of broadband supplier Jasibansel 1 468 01-22-2024 07:15 PM
Last Post: complex1
Sad W52P not picking up IP Burkni 4 4,053 09-19-2023 06:22 PM
Last Post: Burkni
  W56H with W52P Base dmvcomms 7 7,203 03-06-2023 04:39 PM
Last Post: poznaniak
  W73H handset with W52P problem reboot Paco Brufal 2 2,717 03-03-2023 01:21 AM
Last Post: nolto
  W52P Repeater RT10/rt20/RT30 schnell-yealink 3 8,591 04-20-2022 10:17 PM
Last Post: complex1
  W52P Firmware upgrade aunijaffer@gmail.com 5 12,246 09-07-2021 11:42 PM
Last Post: complex1
  W52P Openvpn with mikrotik info@quantiss.com 4 17,277 04-11-2021 06:25 AM
Last Post: Harms_Kubiak
  Reconfig of branded handsets/bases BestGear 3 9,892 10-11-2020 04:57 PM
Last Post: BestGear
  Is there no call history in web management panel in W52P? poznaniak 1 7,617 08-10-2020 12:49 PM
Last Post: complex1
  W52P factory reset without password ralph 1 9,491 04-02-2020 03:05 AM
Last Post: Yisroel_MongoTEL

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication