New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit :

Post Reply 
Thread Rating:
  • 1 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Different Local SIP port for each SIP account on W60P
Author Message
SPC_Support Offline
Junior Member

Posts: 5
Joined: Oct 2016
Reputation: 0
Post: #1
Different Local SIP port for each SIP account on W60P
Hi Yealink Support,

We have the same issue with new Dect phones as it is already reported on Different SIP accounts registered on different handsets of a same base fail oftenly to make calls between them (to transfer a call for example).
The possible solution to this issue is the use of intercom. This solution is acceptable when the internal calls to SIP extensions are only between the Handsets registered to a same base. If the user wants to make a call to a handset registered in another base or another desk phone, the process for call transfer will be different. It means that in an office with some Dect phones and Desk phones, the attended call trasfer process between Dect phones to Dect phones (of same base) and Dect phones to any other phone will be different. Which is not accepted by the customer.

We have received the same issue from several customers and we have been able to solve the issue with the FW for W52P and W56P but in those customers where we have W60P this issue cannot be fixed coz there is no V73 for this model.

As you have commented on above mentioned thread that from V80 onwards all the SIP accounts would use the same SIP port, could you please let me know...
1) Why Yealink has changed it?
2) Was there a demand from any market or any wrong behavior of previous mechanism has driven Yealink to take this step?

Is there any solution on the roadmap? Like something that do Grandstream phones as it is described below?

We have also see in Grandstream Dect phones that allow the user to create different profiles and assign SIP accounts, Handsets and Local SIP port to each profile. Morever, Grandstream phones also offer the possibility to use "Random Local SIP port" for each profile which gives extra control to the administrator.

Looking forward to you replies.

(This post was last modified: 02-20-2018 12:12 PM by SPC_Support.)
02-20-2018 12:11 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
Different Local SIP port for each SIP account on W60P - SPC_Support - 02-20-2018 12:11 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  W60B DECT can't dial 911, using wrong port c.holloway 4 507 04-26-2019 02:39 PM
Last Post: c.holloway
  Two RT30 doesn't work with W60P in chain mode Keldar 2 402 02-28-2019 04:19 PM
Last Post: complex1
  W60P disconnects and fails to register jshaflucas 0 367 12-19-2018 09:46 PM
Last Post: jshaflucas
  W60B and W56H local phonebook TWT_Support 5 1,874 09-19-2018 08:27 AM
Last Post: fpt-fti
  2 Handsets sharing single sip account rich_ng 1 773 05-30-2018 05:56 AM
Last Post: Evan_Yealink

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication