Yealink 48G Phone Auto Provisioning with Elastix

[mallesh]

Hi,

Thanks for reply Flora.

I am stuck at Auto Provision url.

I am doing all config in MAC.cfg regarding registration below is config.
#!version:1.0.0.1
#Note: This file header cannot be edited or deleted
account.1.enable = 1
account.1.label = Tony
account.1.display_name =
account.1.auth_name = 1234
account.1.user_name = 1234
account.1.password = XXXXX
account.1.sip_server.1.address = SERVERIP
account.1.sip_server.1.port = 5060
account.1.sip_listen_port = 5060
#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
account.1.transport = 0
#Enable or disable the phone to subscribe the register status; 0-Disabled (default), 1-Enabled;
account.1.subscribe_register = 1

& yMACADDRESS35.cfg is below.
All codes are keeps are default.
Just change
################################################################################​#######
## Autop URL ##
################################################################################​#######
auto_provision.server.url = tftp://SIPSERVERIP

But my yealink phone is not getting all configuration at phone Bootup time.
One thing interesting when i add SIPIP in Phone web interface at Settings ----Auto provision -- Server URL -- tftp://SIPSERVERIP --- & Auto Provision now.

Strange... It's Working fine really.

Please address me what i am missing in configuration.

Thanks in advance.

Regards
Mallesh