[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SIP 484 address incomplete
Author Message
vieri Offline
Junior Member
**

Posts: 4
Joined: Mar 2015
Reputation: 0
Post: #3
RE: SIP 484 address incomplete
Hi,

The dial-now string feature you're referring to depends exclusively on the client and I would need to setup all possible patterns on each client. This is not what I'm looking for. I need the server to decide if the dialed string matches the server's dialplan and in which case, it should notify the client accordingly. That's what "484 address incomplete" is for.

I already read that the Yealink manual specifies that it supports "484 address incomplete" before posting to the forum. However, it doesn't seem to be enabled by default.

I'm attaching a screenshot (yealink_484_t19p.png) of the packets found when a Yealink SIP-T19P tries to call another SIP extension (in this case callee 4053). It's clear that the Yealink client waits for user input and sends "4053" in just one request.

   

I'm attaching another screenshot (yealink_484_gxp2000.png) of the packets found when a Grandstream GXP2000 with "early dial" enabled tries to call another SIP extension (callee 4053). In this case you can see how the client first sends out the first digit "4" and the Asterisk server replies with "address incomplete", then the client sends a "40", etc., until it finally sends "4053" and the Asterisk server accepts the call because it matches a detsination in its dialplan.

   

So how can I truely enable "484 address incomplete" in the Yealink SIP-T19P firmware?

Thanks,

Vieri
03-20-2015 02:59 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
SIP 484 address incomplete - vieri - 03-19-2015, 09:09 PM
RE: SIP 484 address incomplete - vieri - 03-20-2015 02:59 PM
RE: SIP 484 address incomplete - vieri - 03-24-2015, 02:25 PM
RE: SIP 484 address incomplete - vieri - 03-27-2015, 06:10 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  No IP address for W60 but T42 working ok heathb 2 1,618 03-09-2022 05:11 PM
Last Post: complex1
  speed dial to an IP address (ext@IP on value) EduardoV 3 5,814 11-07-2019 07:43 PM
Last Post: EduardoV
  how toadd image in remote address book of yealink phone? Olkan 1 6,354 07-28-2017 02:12 AM
Last Post: anonymous1664059072296
  T20P request IP address after Static IP config Dave Clements 2 10,334 12-01-2014 06:25 PM
Last Post: Lucas1
  T22p WAN address vs LAN address phone2015 2 7,021 05-30-2014 11:05 PM
Last Post: phone2015
  Unable to obtain IP Address over DHCP randompunteruk 1 20,613 09-30-2013 10:15 PM
Last Post: rcaskey

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication