[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Auto-Provisioning not updating/replacing settings.
Author Message
lorn10 Offline
Junior Member
**

Posts: 43
Joined: Feb 2014
Reputation: 0
Post: #7
RE: Auto-Provisioning not updating/replacing settings.
Quote:Is it just those settings that are not updating? I fixed my problem by manually adding an entry for the auto-provision server's IP.

It seems that when the phones have default settings they will auto-provision based on the server you set with the DHCP option... but once they have been configured through that they ignore subsequent configuration changes unless they know the address of the server to auto-provision from [despite it being available to them through DHCP], so you must manually specify it in the original config or add it through the webUI and force it to provision.

Thanks for your fast answer. Yes, these are the changes which are not updated to the phones. My full y0000000000$suffix.cfg config file looks very different from yours. Where I should add your two new entries?

Code:
[ cfg:/phone/config/system.ini,reboot=1 ]
LocalTime.TimeZone = {$timezone}
LocalTime.TimeServer1 = {$network_time_server}
LocalTime.TimeServer2 = pool.ntp.org
LocalTime.Interval = 1000
LocalTime.SummerTime = 1
LocalTime.dstTimeType = 1
LocalTime.StartTime = 3/5/7/1
LocalTime.EndTime = 10/5/7/2
LocalTime.OffsetTime = 60
LocalTime.TimeFormat = 1
LocalTime.DateFormat = 5

AutoProvision.bEnablePowerOn = 1
AutoProvision.bEnableWeekly = 0
AutoProvision.bEnableDHCPOption = 1
AutoProvision.listSystemOptions = 66,43
AutoProvision.strServerURL = tftp://{$server.ip.1}

telnet.telnet_enable = 0

[ cfg:/phone/config/system.ini,reboot=1]
Profile.CNG = 0
Profile.VAD = 1
Profile.Echo = 1
Profile.SIDE_TONE = -30

[ cfg:/phone/config/user.ini,reboot=1 ]
WatchDog.Time = 10
vpm_tone_Country.Country = {$tones_country}

AlertInfo0.Text = interal
AlertInfo0.Ringer = 2

AlertInfo1.Text = external
AlertInfo1.Ringer = 5

Emergency.Num = 000

PhoneSetting.BacklightTime = 120
PhoneSetting.DialNowDelay = {$dialnowdelay}
PhoneSetting.BackGrounds = {$uselogo}
PhoneSetting.BackLight = 6
PhoneSetting.UnusedBackLight = 0
PhoneSetting.ScreensaverTime = {$screensaverdelay}
PhoneSetting.Theme = {$theme}
PhoneSetting.Voicevolume = 5
PhoneSetting.Lock = 0

[ bin:/phone/config/DialNow.xml,reboot=0 ]
url=tftp://{$server.ip.1}/dialnow.xml

[ psw:/phone/config/.htpasswd ]
admin = {$adminpw}

[ rom:Firmware ]
url = {$firmware_name}

Supplement: Parameter auto_provision.server.url semms to be for firmware V71 and above, - not for V70 based like T38G & T32G are. Does this really works for you at T38G? In my (old) config, parameter AutoProvision.strServerURL seems the correct one. It works for firmware 32.70.0.185 & 38.70.0.185. However, daylight saving parameters are still completely ignored.
(This post was last modified: 11-08-2014 10:24 PM by lorn10.)
11-08-2014 04:47 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Auto-Provisioning not updating/replacing settings. - lorn10 - 11-08-2014 04:47 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T46U Not Contacting Provisioning Server 88fingerslukee 0 298 09-06-2022 11:43 PM
Last Post: 88fingerslukee
  Need help auto provisioning a phone with Nextiva service. LittleDogTech 3 557 08-30-2022 06:28 PM
Last Post: complex1
  Auto provision username and password kbrownlees 7 16,969 08-23-2022 11:16 PM
Last Post: mbole
Wink Auto Provsioning EOL products and devices that do dont have recent firmware releases GalacticSolutions 2 1,773 08-06-2022 12:18 AM
Last Post: Chris708
Question "Trusted Certificates" and auto provisioning jobst 3 1,897 06-15-2022 11:00 AM
Last Post: dbonnell
  T46G RingCentral Provisioning jszima 0 1,201 03-07-2022 10:24 AM
Last Post: jszima
  Auto Provision Wall Paper Stopped Working TRP Tech 4 4,799 11-19-2021 10:27 AM
Last Post: TRP Tech
  Setting of lang.gui via remote provisioning cloudaware 1 2,646 10-26-2021 07:11 PM
Last Post: cloudaware
  zero touch provisioning & firewall gareth20202 2 3,895 10-09-2021 04:55 PM
Last Post: Phil2021
  Step by Step for Auto Provisioning nguyenp 2 6,803 08-06-2021 04:27 PM
Last Post: Phil2021

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication