VP530 Bad Sound

[briankelly63]

Here's a start...

http://www.linuxjournal.com/article/9398

http://www.youtube.com/watch?v=U0QABcTD-xc

http://www.youtube.com/watch?v=y-4UQSXkqig

http://www.google.com/url?sa=t&rct=j&q=&...mg&cad=rja

There's quite a bit on the Wireshark site also, they have a book too.

http://www.wireshark.org/


there are a number of things on youtube also. The trick is getting Wireshark in the loop. If you have a switch that does port mirroring that would be one option. You link the port on the switch with the phone attached to a port that the pc running Wireshark is connected to so it can "see" the packets. The job of a switch is normally to isolate the packets so by turning on port mirroring the packets will be sent to both ports. Another way is to use a laptop with the phone connected to the network interface and bridge it to the wireless interface.

I believe you can also use a version of wincap or its linux equivalent to capture the info on the server and then read it with Wireshark.