Audio Delay - Disable Jitter Buffer?

[complex1]

(07-04-2023 04:48 AM)joni1802 Wrote:  Hello everyone,

is it possible to completely disable the jitter buffer on yealink devices? We are using the T33G and there is a noticeable audio delay on the receiving end with the default jitter buffer settings (min 20, max 240 and normal 120). I have tested the delay on the LAN and the delay was around 350ms. Changing the min max and normal value to zero and the buffer to fixed improves the delay by around 100ms. So the audio delay is at around 250ms. Maybe disabling the jitter buffer at all will improve the delay further.


Kind regards
Joni

Hi Joni,

Unfortunately, it is not possible to disable the jitter buffer, but you can set larger ranges.
Range of Min, Max and Normal Delay is: 0 to 400 ms
Maybe this will solve the issue.